org.scalatest

FlatSpec

class FlatSpec extends FlatSpecLike

Facilitates a “behavior-driven” style of development (BDD), in which tests are combined with text that specifies the behavior the tests verify.

Recommended Usage: Class FlatSpec is a good first step for teams wishing to move from xUnit to BDD, because its structure is flat like xUnit, so simple and familiar, but the test names must be written in a specification style: “X should Y,” “A must B,” etc.

Trait FlatSpec is so named because your specification text and tests line up flat against the left-side indentation level, with no nesting needed. Here's an example FlatSpec:

package org.scalatest.examples.flatspec

import org.scalatest.FlatSpec
class SetSpec extends FlatSpec {
behavior of "An empty Set"
it should "have size 0" in { assert(Set.empty.size === 0) }
it should "produce NoSuchElementException when head is invoked" in { intercept[NoSuchElementException] { Set.empty.head } } }
Note: you can use must or can as well as should in a FlatSpec. For example, instead of it should "pop..., you could write it must "pop... or it can "pop.... Instead of using a behavior of clause, you can alternatively use a shorthand syntax in which you replace the first it with the subject string, like this:
package org.scalatest.examples.flatspec

import org.scalatest.FlatSpec
class SetSpec extends FlatSpec {
"An empty Set" should "have size 0" in { assert(Set.empty.size === 0) }
it should "produce NoSuchElementException when head is invoked" in { intercept[NoSuchElementException] { Set.empty.head } } }
Running either of the two previous three versions of SetSpec in the Scala interpreter would yield:
An empty Set
- should have size 0
- should produce NoSuchElementException when head is invoked
In a FlatSpec you write a one (or more) sentence specification for each bit of behavior you wish to specify and test. Each specification sentence has a "subject," which is sometimes called the system under test (or SUT). The subject is the entity being specified and tested and also serves as the subject of the sentences you write for each test. Often you will want to write multiple tests for the same subject. In a FlatSpec, you name the subject once, with a behavior of clause or its shorthand, then write tests for that subject with it should/must/can "do something" phrases. Each it refers to the most recently declared subject. For example, the four tests shown in this snippet are all testing a stack that contains one item:
behavior of "A Stack (with one item)"

it should "be non-empty" in {}
it should "return the top item on peek" in {}
it should "not remove the top item on peek" in {}
it should "remove the top item on pop" in {}
The same is true if the tests are written using the shorthand notation:
"A Stack (with one item)" should "be non-empty" in {}

it should "return the top item on peek" in {}
it should "not remove the top item on peek" in {}
it should "remove the top item on pop" in {}
In a FlatSpec, therefore, to figure out what "it" means, you just scan vertically until you find the most recent use of behavior of or the shorthand notation. Because sometimes the subject could be plural, you can alternatively use they instead of it:
"The combinators" should "be easy to learn" in {}

they should "be efficient" in {}
they should "do something cool" in {}
A FlatSpec's lifecycle has two phases: the registration phase and the ready phase. It starts in registration phase and enters ready phase the first time run is called on it. It then remains in ready phase for the remainder of its lifetime. Tests can only be registered while the FlatSpec is in its registration phase. Any attempt to register a test after the FlatSpec has entered its ready phase, i.e., after run has been invoked on the FlatSpec, will be met with a thrown TestRegistrationClosedException. The recommended style of using FlatSpec is to register tests during object construction as is done in all the examples shown here. If you keep to the recommended style, you should never see a TestRegistrationClosedException. == Ignored tests == To support the common use case of temporarily disabling a test, with the good intention of resurrecting the test at a later time, FlatSpec provides a method ignore that can be used instead of it or they to register a test. For example, to temporarily disable the test with the name "An empty Set should produce NoSuchElementException when head is invoked", just change “it” into “ignore,” like this:
package org.scalatest.examples.flatspec.ignore

import org.scalatest.FlatSpec
class SetSpec extends FlatSpec {
"An empty Set" should "have size 0" in { assert(Set.empty.size === 0) }
ignore should "produce NoSuchElementException when head is invoked" in { intercept[NoSuchElementException] { Set.empty.head } } }
If you run this version of SetSpec with:
scala> new SetSpec execute
It will run only the first test and report that the second test was ignored:
An empty Set
- should have size 0
- should produce NoSuchElementException when head is invoked !!! IGNORED !!!
When using shorthand notation, you won't have an it to change into ignore for the first test of each new subject. To ignore such tests, you must instead change in to ignore. For example, to temporarily disable the test with the name "An empty Set should have size 0", change “in” into “ignore” like this:
package org.scalatest.examples.flatspec.ignoreafter

import org.scalatest.FlatSpec
class SetSpec extends FlatSpec {
"An empty Set" should "have size 0" ignore { assert(Set.empty.size === 0) }
it should "produce NoSuchElementException when head is invoked" in { intercept[NoSuchElementException] { Set.empty.head } } }
If you run this version of StackSpec with:
scala> new SetSpec execute
It will run only the second test and report that the first test was ignored:
An empty Set
- should have size 0 !!! IGNORED !!!
- should produce NoSuchElementException when head is invoked
If you wish to temporarily ignore an entire suite of tests, you can annotate the test class with @Ignore, like this:
package org.scalatest.examples.flatspec.ignoreall

import org.scalatest._
@Ignore class SetSpec extends FlatSpec {
"An empty Set" should "have size 0" in { assert(Set.empty.size === 0) }
it should "produce NoSuchElementException when head is invoked" in { intercept[NoSuchElementException] { Set.empty.head } } }
When you mark a test class with a tag annotation, ScalaTest will mark each test defined in that class with that tag. Thus, marking the SetSpec in the above example with the @Ignore tag annotation means that both tests in the class will be ignored. If you run the above SetSpec in the Scala interpreter, you'll see:
scala> new SetSpec execute
SetSpec:
An empty Set
- should have size 0 !!! IGNORED !!!
- should produce NoSuchElementException when head is invoked !!! IGNORED !!!
Note that marking a test class as ignored won't prevent it from being discovered by ScalaTest. Ignored classes will be discovered and run, and all their tests will be reported as ignored. This is intended to keep the ignored class visible, to encourage the developers to eventually fix and “un-ignore” it. If you want to prevent a class from being discovered at all, use the DoNotDiscover annotation instead. == Informers == One of the parameters to FlatSpec's run method is a Reporter, which will collect and report information about the running suite of tests. Information about suites and tests that were run, whether tests succeeded or failed, and tests that were ignored will be passed to the Reporter as the suite runs. Most often the reporting done by default by FlatSpec's methods will be sufficient, but occasionally you may wish to provide custom information to the Reporter from a test. For this purpose, an Informer that will forward information to the current Reporter is provided via the info parameterless method. You can pass the extra information to the Informer via its apply method. The Informer will then pass the information to the Reporter via an InfoProvided event. One use case for the Informer is to pass more information about a specification to the reporter. For example, the GivenWhenThen trait provides methods that use the implicit info provided by FlatSpec to pass such information to the reporter. Here's an example:
package org.scalatest.examples.flatspec.info

import collection.mutable import org.scalatest._
class SetSpec extends FlatSpec with GivenWhenThen {
"A mutable Set" should "allow an element to be added" in { Given("an empty mutable Set") val set = mutable.Set.empty[String]
When("an element is added") set += "clarity"
Then("the Set should have size 1") assert(set.size === 1)
And("the Set should contain the added element") assert(set.contains("clarity"))
info("That's all folks!") } }
If you run this FlatSpec from the interpreter, you will see the following output:
scala> new SetSpec execute
SetSpec:
A mutable Set
- should allow an element to be added
  + Given an empty mutable Set
  + When an element is added
  + Then the Set should have size 1
  + And the Set should contain the added element
  + That's all folks! 
== Documenters == FlatSpec also provides a markup method that returns a Documenter, which allows you to send to the Reporter text formatted in Markdown syntax. You can pass the extra information to the Documenter via its apply method. The Documenter will then pass the information to the Reporter via an MarkupProvided event. Here's an example FlatSpec that uses markup:
package org.scalatest.examples.flatspec.markup

import collection.mutable import org.scalatest._
class SetSpec extends FlatSpec with GivenWhenThen {
markup { """ Mutable Set ———-- A set is a collection that contains no duplicate elements. To implement a concrete mutable set, you need to provide implementations of the following methods: def contains(elem: A): Boolean def iterator: Iterator[A] def += (elem: A): this.type def -= (elem: A): this.type If you wish that methods like `take`, `drop`, `filter` return the same kind of set, you should also override: def empty: This It is also good idea to override methods `foreach` and `size` for efficiency. """ }
"A mutable Set" should "allow an element to be added" in { Given("an empty mutable Set") val set = mutable.Set.empty[String]
When("an element is added") set += "clarity"
Then("the Set should have size 1") assert(set.size === 1)
And("the Set should contain the added element") assert(set.contains("clarity"))
markup("This test finished with a **bold** statement!") } }
Although all of ScalaTest's built-in reporters will display the markup text in some form, the HTML reporter will format the markup information into HTML. Thus, the main purpose of markup is to add nicely formatted text to HTML reports. Here's what the above SetSpec would look like in the HTML reporter: == Notifiers and alerters == ScalaTest records text passed to info and markup during tests, and sends the recorded text in the recordedEvents field of test completion events like TestSucceeded and TestFailed. This allows string reporters (like the standard out reporter) to show info and markup text after the test name in a color determined by the outcome of the test. For example, if the test fails, string reporters will show the info and markup text in red. If a test succeeds, string reporters will show the info and markup text in green. While this approach helps the readability of reports, it means that you can't use info to get status updates from long running tests. To get immediate (i.e., non-recorded) notifications from tests, you can use note (a Notifier) and alert (an Alerter). Here's an example showing the differences:
package org.scalatest.examples.flatspec.note

import collection.mutable import org.scalatest._
class SetSpec extends FlatSpec {
"A mutable Set" should "allow an element to be added" in {
info("info is recorded") markup("markup is *also* recorded") note("notes are sent immediately") alert("alerts are also sent immediately")
val set = mutable.Set.empty[String] set += "clarity" assert(set.size === 1) assert(set.contains("clarity")) } }
Because note and alert information is sent immediately, it will appear before the test name in string reporters, and its color will be unrelated to the ultimate outcome of the test: note text will always appear in green, alert text will always appear in yellow. Here's an example:
scala> new SetSpec execute
SetSpec:
A mutable Set
  + notes are sent immediately
  + alerts are also sent immediately
- should allow an element to be added
  + info is recorded
  + markup is *also* recorded
In summary, use info and markup for text that should form part of the specification output. Use note and alert to send status notifications. (Because the HTML reporter is intended to produce a readable, printable specification, info and markup text will appear in the HTML report, but note and alert text will not.) == Pending tests == A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later. To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException. Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality it is intended to test, has not yet been implemented. You can mark tests as pending in FlatSpec like this:
package org.scalatest.examples.flatspec.pending

import org.scalatest._
class SetSpec extends FlatSpec {
"An empty Set" should "have size 0" in (pending)
it should "produce NoSuchElementException when head is invoked" in { intercept[NoSuchElementException] { Set.empty.head } } }
If you run this version of FlatSpec with:
scala> new SetSpec execute
It will run both tests but report that An empty Set should have size 0 is pending. You'll see:
An empty Set
- should have size 0 (pending)
- should produce NoSuchElementException when head is invoked
One difference between an ignored test and a pending one is that an ignored test is intended to be used during a significant refactorings of the code under test, when tests break and you don't want to spend the time to fix all of them immediately. You can mark some of those broken tests as ignored temporarily, so that you can focus the red bar on just failing tests you actually want to fix immediately. Later you can go back and fix the ignored tests. In other words, by ignoring some failing tests temporarily, you can more easily notice failed tests that you actually want to fix. By contrast, a pending test is intended to be used before a test and/or the code under test is written. Pending indicates you've decided to write a test for a bit of behavior, but either you haven't written the test yet, or have only written part of it, or perhaps you've written the test but don't want to implement the behavior it tests until after you've implemented a different bit of behavior you realized you need first. Thus ignored tests are designed to facilitate refactoring of existing code whereas pending tests are designed to facilitate the creation of new code. One other difference between ignored and pending tests is that ignored tests are implemented as a test tag that is excluded by default. Thus an ignored test is never executed. By contrast, a pending test is implemented as a test that throws TestPendingException (which is what calling the pending method does). Thus the body of pending tests are executed up until they throw TestPendingException. The reason for this difference is that it enables your unfinished test to send InfoProvided messages to the reporter before it completes abruptly with TestPendingException, as shown in the previous example on Informers that used the GivenWhenThen trait. For example, the following snippet in a FlatSpec:
"The Scala language" must "add correctly" in {
   Given("two integers")
   When("they are added")
   Then("the result is the sum of the two numbers")
   pending
 }
 // ...
Would yield the following output when run in the interpreter:
The Scala language
- must add correctly (pending)
  + Given two integers
  + When they are added
  + Then the result is the sum of the two numbers
== Tagging tests == A FlatSpec's tests may be classified into groups by tagging them with string names. As with any suite, when executing a FlatSpec, groups of tests can optionally be included and/or excluded. To tag a FlatSpec's tests, you pass objects that extend class org.scalatest.Tag to methods that register tests. Class Tag takes one parameter, a string name. If you have created tag annotation interfaces as described in the Tag documentation, then you will probably want to use tag names on your test functions that match. To do so, simply pass the fully qualified names of the tag interfaces to the Tag constructor. For example, if you've defined tag annotation interfaces with fully qualified names, com.mycompany.tags.SlowTest and com.mycompany.tags.DbTest, then you could create matching tags for FlatSpecs like this:
package org.scalatest.examples.flatspec.tagging

import org.scalatest.Tag
object SlowTest extends Tag("com.mycompany.tags.SlowTest") object DbTest extends Tag("com.mycompany.tags.DbTest")
Given these definitions, you could place FlatSpec tests into groups like this:
import org.scalatest.FlatSpec

class SetSpec extends FlatSpec {
behavior of "An empty Set"
it should "have size 0" taggedAs(SlowTest) in { assert(Set.empty.size === 0) }
it should "produce NoSuchElementException when head is invoked" taggedAs(SlowTest, DbTest) in { intercept[NoSuchElementException] { Set.empty.head } } }
This code marks both tests with the com.mycompany.tags.SlowTest tag, and the second test with the com.mycompany.tags.DbTest tag. The run method takes a Filter, whose constructor takes an optional Set[String] called tagsToInclude and a Set[String] called tagsToExclude. If tagsToInclude is None, all tests will be run except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is defined, only tests belonging to tags mentioned in the tagsToInclude set, and not mentioned in tagsToExclude, will be run. It is recommended, though not required, that you create a corresponding tag annotation when you create a Tag object. A tag annotation allows you to tag all the tests of a FlatSpec in one stroke by annotating the class. For more information and examples, see the documentation for class Tag. == Shared fixtures == A test fixture is composed of the objects and other artifacts (files, sockets, database connections, etc.) tests use to do their work. When multiple tests need to work with the same fixtures, it is important to try and avoid duplicating the fixture code across those tests. The more code duplication you have in your tests, the greater drag the tests will have on refactoring the actual production code. ScalaTest recommends three techniques to eliminate such code duplication: - Refactor using Scala - Override withFixture - Mix in a before-and-after trait Each technique is geared towards helping you reduce code duplication without introducing instance vars, shared mutable objects, or other dependencies between tests. Eliminating shared mutable state across tests will make your test code easier to reason about and more amenable for parallel test execution. The following sections describe these techniques, including explaining the recommended usage for each. But first, here's a table summarizing the options:
Refactor using Scala when different tests need different fixtures.
get-fixture methods The extract method refactor helps you create a fresh instances of mutable fixture objects in each test that needs them, but doesn't help you clean them up when you're done.
fixture-context objects By placing fixture methods and fields into traits, you can easily give each test just the newly created fixtures it needs by mixing together traits. Use this technique when you need different combinations of mutable fixture objects in different tests, and don't need to clean up after.
loan-fixture methods Factor out dupicate code with the loan pattern when different tests need different fixtures that must be cleaned up afterwards.
Override withFixture when most or all tests need the same fixture.
withFixture(NoArgTest) The recommended default approach when most or all tests need the same fixture treatment. This general technique allows you, for example, to perform side effects at the beginning and end of all or most tests, transform the outcome of tests, retry tests, make decisions based on test names, tags, or other test data. Use this technique unless: - Different tests need different fixtures (refactor using Scala instead) - An exception in fixture code should abort the suite, not fail the test (use a before-and-after trait instead) - You have objects to pass into tests (override withFixture(OneArgTest) instead)
withFixture(OneArgTest) Use when you want to pass the same fixture object or objects as a parameter into all or most tests.
Mix in a before-and-after trait when you want an aborted suite, not a failed test, if the fixture code fails.
BeforeAndAfter Use this boilerplate-buster when you need to perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.
BeforeAndAfterEach Use when you want to stack traits that perform the same side-effects before and/or after tests, rather than at the beginning or end of tests.
==== Calling get-fixture methods ==== If you need to create the same mutable fixture objects in multiple tests, and don't need to clean them up after using them, the simplest approach is to write one or more get-fixture methods. A get-fixture method returns a new instance of a needed fixture object (or a holder object containing multiple fixture objects) each time it is called. You can call a get-fixture method at the beginning of each test that needs the fixture, storing the returned object or objects in local variables. Here's an example:
package org.scalatest.examples.flatspec.getfixture

import org.scalatest.FlatSpec import collection.mutable.ListBuffer
class ExampleSpec extends FlatSpec {
def fixture = new { val builder = new StringBuilder("ScalaTest is ") val buffer = new ListBuffer[String] }
"Testing" should "be easy" in { val f = fixture f.builder.append("easy!") assert(f.builder.toString === "ScalaTest is easy!") assert(f.buffer.isEmpty) f.buffer += "sweet" }
it should "be fun" in { val f = fixture f.builder.append("fun!") assert(f.builder.toString === "ScalaTest is fun!") assert(f.buffer.isEmpty) } }
The “f.” in front of each use of a fixture object provides a visual indication of which objects are part of the fixture, but if you prefer, you can import the the members with “import f._” and use the names directly. If you need to configure fixture objects differently in different tests, you can pass configuration into the get-fixture method. For example, if you could pass in an initial value for a mutable fixture object as a parameter to the get-fixture method. ==== Instantiating fixture-context objects ==== An alternate technique that is especially useful when different tests need different combinations of fixture objects is to define the fixture objects as instance variables of fixture-context objects whose instantiation forms the body of tests. Like get-fixture methods, fixture-context objects are only appropriate if you don't need to clean up the fixtures after using them. To use this technique, you define instance variables intialized with fixture objects in traits and/or classes, then in each test instantiate an object that contains just the fixture objects needed by the test. Traits allow you to mix together just the fixture objects needed by each test, whereas classes allow you to pass data in via a constructor to configure the fixture objects. Here's an example in which fixture objects are partitioned into two traits and each test just mixes together the traits it needs:
package org.scalatest.examples.flatspec.fixturecontext

import collection.mutable.ListBuffer import org.scalatest.FlatSpec
class ExampleSpec extends FlatSpec {
trait Builder { val builder = new StringBuilder("ScalaTest is ") }
trait Buffer { val buffer = ListBuffer("ScalaTest", "is") }
// This test needs the StringBuilder fixture "Testing" should "be productive" in new Builder { builder.append("productive!") assert(builder.toString === "ScalaTest is productive!") }
// This test needs the ListBuffer[String] fixture "Test code" should "be readable" in new Buffer { buffer += ("readable!") assert(buffer === List("ScalaTest", "is", "readable!")) }
// This test needs both the StringBuilder and ListBuffer it should "be clear and concise" in new Builder with Buffer { builder.append("clear!") buffer += ("concise!") assert(builder.toString === "ScalaTest is clear!") assert(buffer === List("ScalaTest", "is", "concise!")) } }
==== Overriding withFixture(NoArgTest) ==== Although the get-fixture method and fixture-context object approaches take care of setting up a fixture at the beginning of each test, they don't address the problem of cleaning up a fixture at the end of the test. If you just need to perform a side-effect at the beginning or end of a test, and don't need to actually pass any fixture objects into the test, you can override withFixture(NoArgTest), one of ScalaTest's lifecycle methods defined in trait Suite. Trait Suite's implementation of runTest passes a no-arg test function to withFixture(NoArgTest). It is withFixture's responsibility to invoke that test function. Suite's implementation of withFixture simply invokes the function, like this:
// Default implementation in trait Suite
protected def withFixture(test: NoArgTest) = {
  test()
}
You can, therefore, override withFixture to perform setup before and/or cleanup after invoking the test function. If you have cleanup to perform, you should invoke the test function inside a try block and perform the cleanup in a finally clause, in case an exception propagates back through withFixture. (If a test fails because of an exception, the test function invoked by withFixture will result in a [[org.scalatest.Failed Failed]] wrapping the exception. Nevertheless, best practice is to perform cleanup in a finally clause just in case an exception occurs.) The withFixture method is designed to be stacked, and to enable this, you should always call the super implementation of withFixture, and let it invoke the test function rather than invoking the test function directly. That is to say, instead of writing “test()”, you should write “super.withFixture(test)”, like this:
// Your implementation
override def withFixture(test: NoArgTest) = {
  // Perform setup
  try super.withFixture(test) // Invoke the test function
  finally {
    // Perform cleanup
  }
}
Here's an example in which withFixture(NoArgTest) is used to take a snapshot of the working directory if a test fails, and send that information to the reporter:
package org.scalatest.examples.flatspec.noargtest

import java.io.File import org.scalatest._
class ExampleSpec extends FlatSpec {
override def withFixture(test: NoArgTest) = {
super.withFixture(test) match { case failed: Failed => val currDir = new File(".") val fileNames = currDir.list() info("Dir snapshot: " + fileNames.mkString(", ")) failed case other => other } }
"This test" should "succeed" in { assert(1 + 1 === 2) }
it should "fail" in { assert(1 + 1 === 3) } }
Running this version of ExampleSuite in the interpreter in a directory with two files, hello.txt and world.txt would give the following output:
scala> new ExampleSuite execute
ExampleSuite:
This test
- should succeed
- should fail *** FAILED ***
  2 did not equal 3 (:33)
  + Dir snapshot: hello.txt, world.txt 
Note that the NoArgTest passed to withFixture, in addition to an apply method that executes the test, also includes [[org.scalatest.TestData TestData]] such as the test name and the config map passed to runTest. Thus you can also use the test name and configuration objects in your withFixture implementation. ==== Calling loan-fixture methods ==== If you need to both pass a fixture object into a test and perform cleanup at the end of the test, you'll need to use the loan pattern. If different tests need different fixtures that require cleanup, you can implement the loan pattern directly by writing loan-fixture methods. A loan-fixture method takes a function whose body forms part or all of a test's code. It creates a fixture, passes it to the test code by invoking the function, then cleans up the fixture after the function returns. The following example shows three tests that use two fixtures, a database and a file. Both require cleanup after, so each is provided via a loan-fixture method. (In this example, the database is simulated with a StringBuffer.)
package org.scalatest.examples.flatspec.loanfixture

import java.util.concurrent.ConcurrentHashMap
object DbServer { // Simulating a database server type Db = StringBuffer private val databases = new ConcurrentHashMap[String, Db] def createDb(name: String): Db = { val db = new StringBuffer databases.put(name, db) db } def removeDb(name: String) { databases.remove(name) } }
import org.scalatest.FlatSpec import DbServer._ import java.util.UUID.randomUUID import java.io._
class ExampleSpec extends FlatSpec {
def withDatabase(testCode: Db => Any) { val dbName = randomUUID.toString val db = createDb(dbName) // create the fixture try { db.append("ScalaTest is ") // perform setup testCode(db) // "loan" the fixture to the test } finally removeDb(dbName) // clean up the fixture }
def withFile(testCode: (File, FileWriter) => Any) { val file = File.createTempFile("hello", "world") // create the fixture val writer = new FileWriter(file) try { writer.write("ScalaTest is ") // set up the fixture testCode(file, writer) // "loan" the fixture to the test } finally writer.close() // clean up the fixture }
// This test needs the file fixture "Testing" should "be productive" in withFile { (file, writer) => writer.write("productive!") writer.flush() assert(file.length === 24) }
// This test needs the database fixture "Test code" should "be readable" in withDatabase { db => db.append("readable!") assert(db.toString === "ScalaTest is readable!") }
// This test needs both the file and the database it should "be clear and concise" in withDatabase { db => withFile { (file, writer) => // loan-fixture methods compose db.append("clear!") writer.write("concise!") writer.flush() assert(db.toString === "ScalaTest is clear!") assert(file.length === 21) } } }
As demonstrated by the last test, loan-fixture methods compose. Not only do loan-fixture methods allow you to give each test the fixture it needs, they allow you to give a test multiple fixtures and clean everything up afterwards. Also demonstrated in this example is the technique of giving each test its own "fixture sandbox" to play in. When your fixtures involve external side-effects, like creating files or databases, it is a good idea to give each file or database a unique name as is done in this example. This keeps tests completely isolated, allowing you to run them in parallel if desired. ==== Overriding withFixture(OneArgTest) ==== If all or most tests need the same fixture, you can avoid some of the boilerplate of the loan-fixture method approach by using a fixture.FlatSpec and overriding withFixture(OneArgTest). Each test in a fixture.FlatSpec takes a fixture as a parameter, allowing you to pass the fixture into the test. You must indicate the type of the fixture parameter by specifying FixtureParam, and implement a withFixture method that takes a OneArgTest. This withFixture method is responsible for invoking the one-arg test function, so you can perform fixture set up before, and clean up after, invoking and passing the fixture into the test function. To enable the stacking of traits that define withFixture(NoArgTest), it is a good idea to let withFixture(NoArgTest) invoke the test function instead of invoking the test function directly. To do so, you'll need to convert the OneArgTest to a NoArgTest. You can do that by passing the fixture object to the toNoArgTest method of OneArgTest. In other words, instead of writing “test(theFixture)”, you'd delegate responsibility for invoking the test function to the withFixture(NoArgTest) method of the same instance by writing:
withFixture(test.toNoArgTest(theFixture))
Here's a complete example:
package org.scalatest.examples.flatspec.oneargtest

import org.scalatest.fixture import java.io._
class ExampleSpec extends fixture.FlatSpec {
case class FixtureParam(file: File, writer: FileWriter)
def withFixture(test: OneArgTest) = { val file = File.createTempFile("hello", "world") // create the fixture val writer = new FileWriter(file) val theFixture = FixtureParam(file, writer)
try { writer.write("ScalaTest is ") // set up the fixture withFixture(test.toNoArgTest(theFixture)) // "loan" the fixture to the test } finally writer.close() // clean up the fixture }
"Testing" should "be easy" in { f => f.writer.write("easy!") f.writer.flush() assert(f.file.length === 18) }
it should "be fun" in { f => f.writer.write("fun!") f.writer.flush() assert(f.file.length === 17) } }
In this example, the tests actually required two fixture objects, a File and a FileWriter. In such situations you can simply define the FixtureParam type to be a tuple containing the objects, or as is done in this example, a case class containing the objects. For more information on the withFixture(OneArgTest) technique, see the documentation for fixture.FlatSpec. ==== Mixing in BeforeAndAfter ==== In all the shared fixture examples shown so far, the activities of creating, setting up, and cleaning up the fixture objects have been performed during the test. This means that if an exception occurs during any of these activities, it will be reported as a test failure. Sometimes, however, you may want setup to happen before the test starts, and cleanup after the test has completed, so that if an exception occurs during setup or cleanup, the entire suite aborts and no more tests are attempted. The simplest way to accomplish this in ScalaTest is to mix in trait BeforeAndAfter. With this trait you can denote a bit of code to run before each test with before and/or after each test each test with after, like this:
package org.scalatest.examples.flatspec.beforeandafter

import org.scalatest._ import collection.mutable.ListBuffer
class ExampleSpec extends FlatSpec with BeforeAndAfter {
val builder = new StringBuilder val buffer = new ListBuffer[String]
before { builder.append("ScalaTest is ") }
after { builder.clear() buffer.clear() }
"Testing" should "be easy" in { builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(buffer.isEmpty) buffer += "sweet" }
it should "be fun" in { builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(buffer.isEmpty) } }
Note that the only way before and after code can communicate with test code is via some side-effecting mechanism, commonly by reassigning instance vars or by changing the state of mutable objects held from instance vals (as in this example). If using instance vars or mutable objects held from instance vals you wouldn't be able to run tests in parallel in the same instance of the test class unless you synchronized access to the shared, mutable state. This is why ScalaTest's ParallelTestExecution trait extends OneInstancePerTest. By running each test in its own instance of the class, each test has its own copy of the instance variables, so you don't need to synchronize. If you mixed ParallelTestExecution into the ExampleSuite above, the tests would run in parallel just fine without any synchronization needed on the mutable StringBuilder and ListBuffer[String] objects. Although BeforeAndAfter provides a minimal-boilerplate way to execute code before and after tests, it isn't designed to enable stackable traits, because the order of execution would be non-obvious. If you want to factor out before and after code that is common to multiple test suites, you should use trait BeforeAndAfterEach instead, as shown later in the next section, composing fixtures by stacking traits. == Composing fixtures by stacking traits == In larger projects, teams often end up with several different fixtures that test classes need in different combinations, and possibly initialized (and cleaned up) in different orders. A good way to accomplish this in ScalaTest is to factor the individual fixtures into traits that can be composed using the stackable trait pattern. This can be done, for example, by placing withFixture methods in several traits, each of which call super.withFixture. Here's an example in which the StringBuilder and ListBuffer[String] fixtures used in the previous examples have been factored out into two stackable fixture traits named Builder and Buffer:
package org.scalatest.examples.flatspec.composingwithfixture

import org.scalatest._ import collection.mutable.ListBuffer
trait Builder extends SuiteMixin { this: Suite =>
val builder = new StringBuilder
abstract override def withFixture(test: NoArgTest) = { builder.append("ScalaTest is ") try super.withFixture(test) // To be stackable, must call super.withFixture finally builder.clear() } }
trait Buffer extends SuiteMixin { this: Suite =>
val buffer = new ListBuffer[String]
abstract override def withFixture(test: NoArgTest) = { try super.withFixture(test) // To be stackable, must call super.withFixture finally buffer.clear() } }
class ExampleSpec extends FlatSpec with Builder with Buffer {
"Testing" should "be easy" in { builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(buffer.isEmpty) buffer += "sweet" }
it should "be fun" in { builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(buffer.isEmpty) buffer += "clear" } }
By mixing in both the Builder and Buffer traits, ExampleSuite gets both fixtures, which will be initialized before each test and cleaned up after. The order the traits are mixed together determines the order of execution. In this case, Builder is “super” to Buffer. If you wanted Buffer to be “super” to Builder, you need only switch the order you mix them together, like this:
class Example2Suite extends Suite with Buffer with Builder
And if you only need one fixture you mix in only that trait:
class Example3Suite extends Suite with Builder
Another way to create stackable fixture traits is by extending the BeforeAndAfterEach and/or BeforeAndAfterAll traits. BeforeAndAfterEach has a beforeEach method that will be run before each test (like JUnit's setUp), and an afterEach method that will be run after (like JUnit's tearDown). Similarly, BeforeAndAfterAll has a beforeAll method that will be run before all tests, and an afterAll method that will be run after all tests. Here's what the previously shown example would look like if it were rewritten to use the BeforeAndAfterEach methods instead of withFixture:
package org.scalatest.examples.flatspec.composingbeforeandaftereach

import org.scalatest._ import collection.mutable.ListBuffer
trait Builder extends BeforeAndAfterEach { this: Suite =>
val builder = new StringBuilder
override def beforeEach() { builder.append("ScalaTest is ") super.beforeEach() // To be stackable, must call super.beforeEach }
override def afterEach() { try super.afterEach() // To be stackable, must call super.afterEach finally builder.clear() } }
trait Buffer extends BeforeAndAfterEach { this: Suite =>
val buffer = new ListBuffer[String]
override def afterEach() { try super.afterEach() // To be stackable, must call super.afterEach finally buffer.clear() } }
class ExampleSpec extends FlatSpec with Builder with Buffer {
"Testing" should "be easy" in { builder.append("easy!") assert(builder.toString === "ScalaTest is easy!") assert(buffer.isEmpty) buffer += "sweet" }
it should "be fun" in { builder.append("fun!") assert(builder.toString === "ScalaTest is fun!") assert(buffer.isEmpty) buffer += "clear" } }
To get the same ordering as withFixture, place your super.beforeEach call at the end of each beforeEach method, and the super.afterEach call at the beginning of each afterEach method, as shown in the previous example. It is a good idea to invoke super.afterEach in a try block and perform cleanup in a finally clause, as shown in the previous example, because this ensures the cleanup code is performed even if super.afterEach throws an exception. The difference between stacking traits that extend BeforeAndAfterEach versus traits that implement withFixture is that setup and cleanup code happens before and after the test in BeforeAndAfterEach, but at the beginning and end of the test in withFixture. Thus if a withFixture method completes abruptly with an exception, it is considered a failed test. By contrast, if any of the beforeEach or afterEach methods of BeforeAndAfterEach complete abruptly, it is considered an aborted suite, which will result in a SuiteAborted event. == Shared tests == Sometimes you may want to run the same test code on different fixture objects. In other words, you may want to write tests that are "shared" by different fixture objects. To accomplish this in a FlatSpec, you first place shared tests in behavior functions. These behavior functions will be invoked during the construction phase of any FlatSpec that uses them, so that the tests they contain will be registered as tests in that FlatSpec. For example, given this stack class:
import scala.collection.mutable.ListBuffer

class Stack[T] {
val MAX = 10 private val buf = new ListBuffer[T]
def push(o: T) { if (!full) buf.prepend(o) else throw new IllegalStateException("can't push onto a full stack") }
def pop(): T = { if (!empty) buf.remove(0) else throw new IllegalStateException("can't pop an empty stack") }
def peek: T = { if (!empty) buf(0) else throw new IllegalStateException("can't pop an empty stack") }
def full: Boolean = buf.size == MAX def empty: Boolean = buf.size == 0 def size = buf.size
override def toString = buf.mkString("Stack(", ", ", ")") }
You may want to test the Stack class in different states: empty, full, with one item, with one item less than capacity, etc. You may find you have several tests that make sense any time the stack is non-empty. Thus you'd ideally want to run those same tests for three stack fixture objects: a full stack, a stack with a one item, and a stack with one item less than capacity. With shared tests, you can factor these tests out into a behavior function, into which you pass the stack fixture to use when running the tests. So in your FlatSpec for stack, you'd invoke the behavior function three times, passing in each of the three stack fixtures so that the shared tests are run for all three fixtures. You can define a behavior function that encapsulates these shared tests inside the FlatSpec that uses them. If they are shared between different FlatSpecs, however, you could also define them in a separate trait that is mixed into each FlatSpec that uses them. For example, here the nonEmptyStack behavior function (in this case, a behavior method) is defined in a trait along with another method containing shared tests for non-full stacks:
trait StackBehaviors { this: FlatSpec =>

def nonEmptyStack(newStack: => Stack[Int], lastItemAdded: Int) {
it should "be non-empty" in { assert(!newStack.empty) }
it should "return the top item on peek" in { assert(newStack.peek === lastItemAdded) }
it should "not remove the top item on peek" in { val stack = newStack val size = stack.size assert(stack.peek === lastItemAdded) assert(stack.size === size) }
it should "remove the top item on pop" in { val stack = newStack val size = stack.size assert(stack.pop === lastItemAdded) assert(stack.size === size - 1) } }
def nonFullStack(newStack: => Stack[Int]) {
it should "not be full" in { assert(!newStack.full) }
it should "add to the top on push" in { val stack = newStack val size = stack.size stack.push(7) assert(stack.size === size + 1) assert(stack.peek === 7) } } }
Given these behavior functions, you could invoke them directly, but FlatSpec offers a DSL for the purpose, which looks like this:
it should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
it should behave like nonFullStack(stackWithOneItem)
If you prefer to use an imperative style to change fixtures, for example by mixing in BeforeAndAfterEach and reassigning a stack var in beforeEach, you could write your behavior functions in the context of that var, which means you wouldn't need to pass in the stack fixture because it would be in scope already inside the behavior function. In that case, your code would look like this:
it should behave like nonEmptyStack // assuming lastValuePushed is also in scope inside nonEmptyStack
it should behave like nonFullStack
The recommended style, however, is the functional, pass-all-the-needed-values-in style. Here's an example:
class SharedTestExampleSpec extends FlatSpec with StackBehaviors {

// Stack fixture creation methods def emptyStack = new Stack[Int]
def fullStack = { val stack = new Stack[Int] for (i <- 0 until stack.MAX) stack.push(i) stack }
def stackWithOneItem = { val stack = new Stack[Int] stack.push(9) stack }
def stackWithOneItemLessThanCapacity = { val stack = new Stack[Int] for (i <- 1 to 9) stack.push(i) stack }
val lastValuePushed = 9
"A Stack (when empty)" should "be empty" in { assert(emptyStack.empty) }
it should "complain on peek" in { intercept[IllegalStateException] { emptyStack.peek } }
it should "complain on pop" in { intercept[IllegalStateException] { emptyStack.pop } }
"A Stack (with one item)" should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
it should behave like nonFullStack(stackWithOneItem)
"A Stack (with one item less than capacity)" should behave like nonEmptyStack(stackWithOneItemLessThanCapacity, lastValuePushed)
it should behave like nonFullStack(stackWithOneItemLessThanCapacity)
"A Stack (full)" should "be full" in { assert(fullStack.full) }
it should behave like nonEmptyStack(fullStack, lastValuePushed)
it should "complain on a push" in { intercept[IllegalStateException] { fullStack.push(10) } } }
If you load these classes into the Scala interpreter (with scalatest's JAR file on the class path), and execute it, you'll see:
scala> new SharedTestExampleSpec execute
A Stack (when empty)
- should be empty
- should complain on peek
- should complain on pop
A Stack (with one item)
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should not be full
- should add to the top on push
A Stack (with one item less than capacity)
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should not be full
- should add to the top on push
A Stack (full)
- should be full
- should be non-empty
- should return the top item on peek
- should not remove the top item on peek
- should remove the top item on pop
- should complain on a push
One thing to keep in mind when using shared tests is that in ScalaTest, each test in a suite must have a unique name. If you register the same tests repeatedly in the same suite, one problem you may encounter is an exception at runtime complaining that multiple tests are being registered with the same test name. A good way to solve this problem in a FlatSpec is to make sure each invocation of a behavior function is in the context of a different set of when, verb (should, must, or can), and that clauses, which will prepend a string to each test name. For example, the following code in a FlatSpec would register a test with the name "A Stack (when empty) should be empty":
behavior of "A Stack (when empty)"

it should "be empty" in { assert(emptyStack.empty) } // ...
Or, using the shorthand notation:
"A Stack" when {
  "empty" should {
    "be empty" in {
      assert(emptyStack.empty)
    }
  }
}
// ...
If the "should be empty" test was factored out into a behavior function, it could be called repeatedly so long as each invocation of the behavior function is in the context of a different combination of when, verb, and that clauses.

Source
FlatSpec.scala
Linear Supertypes
Ordering
  1. Alphabetic
  2. By inheritance
Inherited
  1. FlatSpec
  2. FlatSpecLike
  3. Documenting
  4. Alerting
  5. Notifying
  6. Informing
  7. CanVerb
  8. MustVerb
  9. ShouldVerb
  10. TestRegistration
  11. Suite
  12. Serializable
  13. AbstractSuite
  14. Assertions
  15. TripleEquals
  16. TripleEqualsSupport
  17. AnyRef
  18. Any
  1. Hide All
  2. Show all
Learn more about member selection
Visibility
  1. Public
  2. All

Instance Constructors

  1. new FlatSpec()

Type Members

  1. class AssertionsHelper extends AnyRef

    Helper class used by code generated by the assert macro.

    Helper class used by code generated by the assert macro.

    Definition Classes
    Assertions
  2. final class BehaviorWord extends AnyRef

    Class that supports the registration of a “subject” being specified and tested via the instance referenced from FlatSpec's behavior field.

    Class that supports the registration of a “subject” being specified and tested via the instance referenced from FlatSpec's behavior field.

    This field enables syntax such as the following subject registration:

    behavior of "A Stack"
    ^
    

    For more information and examples of the use of the behavior field, see the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  3. class CheckingEqualizer[L] extends AnyRef

    Class used via an implicit conversion to enable two objects to be compared with === and !== with a Boolean result and an enforced type constraint between two object types.

    Class used via an implicit conversion to enable two objects to be compared with === and !== with a Boolean result and an enforced type constraint between two object types. For example:

    assert(a === b)
    assert(c !== d)
    

    You can also check numeric values against another with a tolerance. Here are some examples:

    assert(a === (2.0 +- 0.1))
    assert(c !== (2.0 +- 0.1))
    

    Definition Classes
    TripleEqualsSupport
  4. class Equalizer[L] extends AnyRef

    Class used via an implicit conversion to enable any two objects to be compared with === and !== with a Boolean result and no enforced type constraint between two object types.

    Class used via an implicit conversion to enable any two objects to be compared with === and !== with a Boolean result and no enforced type constraint between two object types. For example:

    assert(a === b)
    assert(c !== d)
    

    You can also check numeric values against another with a tolerance. Here are some examples:

    assert(a === (2.0 +- 0.1))
    assert(c !== (2.0 +- 0.1))
    

    Definition Classes
    TripleEqualsSupport
  5. final class IgnoreVerbString extends AnyRef

    Class that supports registration of ignored tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    Class that supports registration of ignored tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    This class enables syntax such as the following registration of an ignored test:

    ignore should "pop values in last-in-first-out order" in { ... }
                                                          ^
    

    In addition, it enables syntax such as the following registration of an ignored, pending test:

    ignore should "pop values in last-in-first-out order" is (pending)
                                                          ^
    

    Note: the is method is provided for completeness and design symmetry, given there's no way to prevent changing is to ignore and marking a pending test as ignored that way. Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.

    And finally, it also enables syntax such as the following ignored, tagged test registration:

    ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                          ^
    

    For more information and examples of the use of the ignore field, see the Ignored tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  6. final class IgnoreVerbStringTaggedAs extends AnyRef

    Class that supports registration of ignored, tagged tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    Class that supports registration of ignored, tagged tests via the IgnoreWord instance referenced from FlatSpec's ignore field.

    This class enables syntax such as the following registration of an ignored, tagged test:

    ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                                             ^
    

    In addition, it enables syntax such as the following registration of an ignored, tagged, pending test:

    ignore should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
                                                                             ^
    

    Note: the is method is provided for completeness and design symmetry, given there's no way to prevent changing is to ignore and marking a pending test as ignored that way. Although it isn't clear why someone would want to mark a pending test as ignored, it can be done.

    For more information and examples of the use of the ignore field, see the Ignored tests section in the main documentation for trait FlatSpec. For examples of tagged test registration, see the Tagging tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  7. final class IgnoreWord extends AnyRef

    Class that supports registration of ignored tests via the ItWord instance referenced from FlatSpec's ignore field.

    Class that supports registration of ignored tests via the ItWord instance referenced from FlatSpec's ignore field.

    This class enables syntax such as the following registration of an ignored test:

    ignore should "pop values in last-in-first-out order" in { ... }
    ^
    

    For more information and examples of the use of the ignore field, see Ignored tests section in the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  8. final class InAndIgnoreMethods extends AnyRef

    Class that supports test registration in shorthand form.

    Class that supports test registration in shorthand form.

    For example, this class enables syntax such as the following test registration in shorthand form:

    "A Stack (when empty)" should "be empty" in { ... }
                                             ^
    

    This class also enables syntax such as the following ignored test registration in shorthand form:

    "A Stack (when empty)" should "be empty" ignore { ... }
                                             ^
    

    This class is used via an implicit conversion (named convertToInAndIgnoreMethods) from ResultOfStringPassedToVerb. The ResultOfStringPassedToVerb class does not declare any methods named in, because the type passed to in differs in a FlatSpec and a fixture.FlatSpec. A fixture.FlatSpec needs two in methods, one that takes a no-arg test function and another that takes a one-arg test function (a test that takes a Fixture as its parameter). By constrast, a FlatSpec needs only one in method that takes a by-name parameter. As a result, FlatSpec and fixture.FlatSpec each provide an implicit conversion from ResultOfStringPassedToVerb to a type that provides the appropriate in methods.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  9. final class InAndIgnoreMethodsAfterTaggedAs extends AnyRef

    Class that supports tagged test registration in shorthand form.

    Class that supports tagged test registration in shorthand form.

    For example, this class enables syntax such as the following tagged test registration in shorthand form:

    "A Stack (when empty)" should "be empty" taggedAs() in { ... }
                                                        ^
    

    This class also enables syntax such as the following tagged, ignored test registration in shorthand form:

    "A Stack (when empty)" should "be empty" taggedAs(SlowTest) ignore { ... }
                                                                ^
    

    This class is used via an implicit conversion (named convertToInAndIgnoreMethodsAfterTaggedAs) from ResultOfTaggedAsInvocation. The ResultOfTaggedAsInvocation class does not declare any methods named in, because the type passed to in differs in a FlatSpec and a fixture.FlatSpec. A fixture.FlatSpec needs two in methods, one that takes a no-arg test function and another that takes a one-arg test function (a test that takes a Fixture as its parameter). By constrast, a FlatSpec needs only one in method that takes a by-name parameter. As a result, FlatSpec and fixture.FlatSpec each provide an implicit conversion from ResultOfTaggedAsInvocation to a type that provides the appropriate in methods.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  10. final class ItVerbString extends AnyRef

    Class that supports test registration via the ItWord instance referenced from FlatSpec's it field.

    Class that supports test registration via the ItWord instance referenced from FlatSpec's it field.

    This class enables syntax such as the following test registration:

    it should "pop values in last-in-first-out order" in { ... }
                                                      ^
    

    It also enables syntax such as the following registration of an ignored test:

    it should "pop values in last-in-first-out order" ignore { ... }
                                                      ^
    

    In addition, it enables syntax such as the following registration of a pending test:

    it should "pop values in last-in-first-out order" is (pending)
                                                      ^
    

    And finally, it also enables syntax such as the following tagged test registration:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                      ^
    

    For more information and examples of the use of the it field, see the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  11. final class ItVerbStringTaggedAs extends AnyRef

    Class that supports the registration of tagged tests via the ItWord instance referenced from FlatSpec's it field.

    Class that supports the registration of tagged tests via the ItWord instance referenced from FlatSpec's it field.

    This class enables syntax such as the following tagged test registration:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                                         ^
    

    It also enables syntax such as the following registration of an ignored, tagged test:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
                                                                         ^
    

    In addition, it enables syntax such as the following registration of a pending, tagged test:

    it should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
                                                                         ^
    

    For more information and examples of the use of the it field to register tagged tests, see the Tagging tests section in the main documentation for trait FlatSpec. For examples of tagged test registration, see the Tagging tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  12. final class ItWord extends AnyRef

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    This class enables syntax such as the following test registration:

    it should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    it should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  13. class LegacyCheckingEqualizer[L] extends AnyRef

    Class used via an implicit conversion to enable any two objects to be compared with === and !== with an Option[String] result and an enforced type constraint between two object types.

    Class used via an implicit conversion to enable any two objects to be compared with === and !== with an Option[String] result and an enforced type constraint between two object types. For example:

    assert(a === b)
    assert(c !== d)
    

    You can also check numeric values against another with a tolerance. Here are some examples:

    assert(a === (2.0 +- 0.1))
    assert(c !== (2.0 +- 0.1))
    

    The benefit of using assert(a === b) rather than assert(a == b) in ScalaTest code is that a TestFailedException produced by the former will include the values of a and b in its detail message.

    Note: This class has "Legacy" in its name because its approach to error messages will eventually be replaced by macros. Once ScalaTest no longer supports Scala 2.9, this class will be deprecated in favor of class Equalizer. Instead of obtaining nice error messages via the Option[String] returned by the methods of this class, the error messages will be obtained by a macro. The "legacy" approach to good error messages will continue to be used, however, until ScalaTest no longer supports Scala 2.9, since macros were introduced to Scala (in experimental form) in 2.10.

    The primary constructor takes one object, left, whose type is being converted to Equalizer. The left value may be a null reference, because this is allowed by Scala's == operator.

    Definition Classes
    TripleEqualsSupport
  14. class LegacyEqualizer[L] extends AnyRef

    Class used via an implicit conversion to enable any two objects to be compared with === and !== with an Option[String] result and no enforced type constraint between two object types.

    Class used via an implicit conversion to enable any two objects to be compared with === and !== with an Option[String] result and no enforced type constraint between two object types. For example:

    assert(a === b)
    assert(c !== d)
    

    You can also check numeric values against another with a tolerance. Here are some examples:

    assert(a === (2.0 +- 0.1))
    assert(c !== (2.0 +- 0.1))
    

    The benefit of using assert(a === b) rather than assert(a == b) in ScalaTest code is that a TestFailedException produced by the former will include the values of a and b in its detail message.

    Note: This class has "Legacy" in its name because its approach to error messages will eventually be replaced by macros. Once ScalaTest no longer supports Scala 2.9, this class will be deprecated in favor of class Equalizer. Instead of obtaining nice error messages via the Option[String] returned by the methods of this class, the error messages will be obtained by a macro. The "legacy" approach to good error messages will continue to be used, however, until ScalaTest no longer supports Scala 2.9, since macros were introduced to Scala (in experimental form) in 2.10.

    The primary constructor takes one object, left, whose type is being converted to Equalizer. The left value may be a null reference, because this is allowed by Scala's == operator.

    Definition Classes
    TripleEqualsSupport
  15. trait NoArgTest extends () ⇒ Outcome with TestData

    A test function taking no arguments and returning an Outcome.

    A test function taking no arguments and returning an Outcome.

    For more detail and examples, see the relevant section in the documentation for trait fixture.FlatSpec.

    Attributes
    protected
    Definition Classes
    Suite
  16. trait StringCanWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class is used in conjunction with an implicit conversion to enable can methods to be invoked on Strings.

    Definition Classes
    CanVerb
  17. trait StringMustWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class is used in conjunction with an implicit conversion to enable must methods to be invoked on Strings.

    Definition Classes
    MustVerb
  18. trait StringShouldWrapperForVerb extends AnyRef

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class supports the syntax of FlatSpec, WordSpec, fixture.FlatSpec, and fixture.WordSpec.

    This class is used in conjunction with an implicit conversion to enable should methods to be invoked on Strings.

    Definition Classes
    ShouldVerb
  19. final class TheyVerbString extends AnyRef

    Class that supports test registration via the TheyWord instance referenced from FlatSpec's they field.

    Class that supports test registration via the TheyWord instance referenced from FlatSpec's they field.

    This class enables syntax such as the following test registration:

    they should "pop values in last-in-first-out order" in { ... }
                                                        ^
    

    It also enables syntax such as the following registration of an ignored test:

    they should "pop values in last-in-first-out order" ignore { ... }
                                                        ^
    

    In addition, it enables syntax such as the following registration of a pending test:

    they should "pop values in last-in-first-out order" is (pending)
                                                        ^
    

    And finally, it also enables syntax such as the following tagged test registration:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                        ^
    

    For more information and examples of the use of the it field, see the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  20. final class TheyVerbStringTaggedAs extends AnyRef

    Class that supports the registration of tagged tests via the TheyWord instance referenced from FlatSpec's they field.

    Class that supports the registration of tagged tests via the TheyWord instance referenced from FlatSpec's they field.

    This class enables syntax such as the following tagged test registration:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) in { ... }
                                                                           ^
    

    It also enables syntax such as the following registration of an ignored, tagged test:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) ignore { ... }
                                                                           ^
    

    In addition, it enables syntax such as the following registration of a pending, tagged test:

    they should "pop values in last-in-first-out order" taggedAs(SlowTest) is (pending)
                                                                           ^
    

    For more information and examples of the use of the they field to register tagged tests, see the Tagging tests section in the main documentation for trait FlatSpec. For examples of tagged test registration, see the Tagging tests section in the main documentation for trait FlatSpec.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  21. final class TheyWord extends AnyRef

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    Class that supports test (and shared test) registration via the instance referenced from FlatSpec's it field.

    This class enables syntax such as the following test registration:

    they should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    they should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike

Value Members

  1. final def !=(arg0: Any): Boolean

    Definition Classes
    AnyRef → Any
  2. def !==[T](right: Spread[T]): TripleEqualsInvocationOnSpread[T]

    Returns a TripleEqualsInvocationOnSpread[T], given an Spread[T], to facilitate the “<left> should !== (<pivot> +- <tolerance>)” syntax of Matchers.

    Returns a TripleEqualsInvocationOnSpread[T], given an Spread[T], to facilitate the “<left> should !== (<pivot> +- <tolerance>)” syntax of Matchers.

    right

    the Spread[T] against which to compare the left-hand value

    returns

    a TripleEqualsInvocationOnSpread wrapping the passed Spread[T] value, with expectingEqual set to false.

    Definition Classes
    TripleEqualsSupport
  3. def !==(right: Null): TripleEqualsInvocation[Null]

    Returns a TripleEqualsInvocation[Null], given a null reference, to facilitate the “<left> should !== null” syntax of Matchers.

    Returns a TripleEqualsInvocation[Null], given a null reference, to facilitate the “<left> should !== null” syntax of Matchers.

    right

    a null reference

    returns

    a TripleEqualsInvocation wrapping the passed null value, with expectingEqual set to false.

    Definition Classes
    TripleEqualsSupport
  4. def !==[T](right: T): TripleEqualsInvocation[T]

    Returns a TripleEqualsInvocation[T], given an object of type T, to facilitate the “<left> should !== <right>” syntax of Matchers.

    Returns a TripleEqualsInvocation[T], given an object of type T, to facilitate the “<left> should !== <right>” syntax of Matchers.

    right

    the right-hand side value for an equality assertion

    returns

    a TripleEqualsInvocation wrapping the passed right value, with expectingEqual set to false.

    Definition Classes
    TripleEqualsSupport
  5. final def ##(): Int

    Definition Classes
    AnyRef → Any
  6. final def ==(arg0: Any): Boolean

    Definition Classes
    AnyRef → Any
  7. def ===[T](right: Spread[T]): TripleEqualsInvocationOnSpread[T]

    Returns a TripleEqualsInvocationOnSpread[T], given an Spread[T], to facilitate the “<left> should === (<pivot> +- <tolerance>)” syntax of Matchers.

    Returns a TripleEqualsInvocationOnSpread[T], given an Spread[T], to facilitate the “<left> should === (<pivot> +- <tolerance>)” syntax of Matchers.

    right

    the Spread[T] against which to compare the left-hand value

    returns

    a TripleEqualsInvocationOnSpread wrapping the passed Spread[T] value, with expectingEqual set to true.

    Definition Classes
    TripleEqualsSupport
  8. def ===(right: Null): TripleEqualsInvocation[Null]

    Returns a TripleEqualsInvocation[Null], given a null reference, to facilitate the “<left> should === null” syntax of Matchers.

    Returns a TripleEqualsInvocation[Null], given a null reference, to facilitate the “<left> should === null” syntax of Matchers.

    right

    a null reference

    returns

    a TripleEqualsInvocation wrapping the passed null value, with expectingEqual set to true.

    Definition Classes
    TripleEqualsSupport
  9. def ===[T](right: T): TripleEqualsInvocation[T]

    Returns a TripleEqualsInvocation[T], given an object of type T, to facilitate the “<left> should === <right>” syntax of Matchers.

    Returns a TripleEqualsInvocation[T], given an object of type T, to facilitate the “<left> should === <right>” syntax of Matchers.

    right

    the right-hand side value for an equality assertion

    returns

    a TripleEqualsInvocation wrapping the passed right value, with expectingEqual set to true.

    Definition Classes
    TripleEqualsSupport
  10. def alert: Alerter

    Returns an Alerter that during test execution will forward strings passed to its apply method to the current reporter.

    Returns an Alerter that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked while this FlatSpec is being executed, such as from inside a test function, it will forward the information to the current reporter immediately. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    FlatSpecLikeAlerting
  11. final def asInstanceOf[T0]: T0

    Definition Classes
    Any
  12. macro def assert(condition: Boolean, clue: Any): Unit

    Assert that a boolean condition, described in String message, is true.

    Assert that a boolean condition, described in String message, is true. If the condition is true, this method returns normally. Else, it throws TestFailedException with a helpful error message appended with the String obtained by invoking toString on the specified clue as the exception's detail message.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assert(a == b, "a good clue")
    • assert(a != b, "a good clue")
    • assert(a === b, "a good clue")
    • assert(a !== b, "a good clue")
    • assert(a > b, "a good clue")
    • assert(a >= b, "a good clue")
    • assert(a < b, "a good clue")
    • assert(a <= b, "a good clue")
    • assert(a startsWith "prefix", "a good clue")
    • assert(a endsWith "postfix", "a good clue")
    • assert(a contains "something", "a good clue")
    • assert(a eq b, "a good clue")
    • assert(a ne b, "a good clue")
    • assert(a > 0 && b > 5, "a good clue")
    • assert(a > 0 || b > 5, "a good clue")
    • assert(a.isEmpty, "a good clue")
    • assert(!a.isEmpty, "a good clue")
    • assert(a.isInstanceOf[String], "a good clue")
    • assert(a.length == 8, "a good clue")
    • assert(a.size == 8, "a good clue")
    • assert(a.exists(_ == 8), "a good clue")

    At this time, any other form of expression will just get a TestFailedException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean, not Option[String] to be the default in tests. This makes === consistent between tests and production code. If you have pre-existing code you wrote under ScalaTest 1.x, in which you are expecting=== to return an Option[String], use can get that behavior back by mixing in trait LegacyTripleEquals.

    condition

    the boolean condition to assert

    clue

    An objects whose toString method returns a message to include in a failure report.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if message is null.

    TestFailedException

    if the condition is false.

  13. macro def assert(condition: Boolean): Unit

    Assert that a boolean condition is true.

    Assert that a boolean condition is true. If the condition is true, this method returns normally. Else, it throws TestFailedException.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assert(a == b)
    • assert(a != b)
    • assert(a === b)
    • assert(a !== b)
    • assert(a > b)
    • assert(a >= b)
    • assert(a < b)
    • assert(a <= b)
    • assert(a startsWith "prefix")
    • assert(a endsWith "postfix")
    • assert(a contains "something")
    • assert(a eq b)
    • assert(a ne b)
    • assert(a > 0 && b > 5)
    • assert(a > 0 || b > 5)
    • assert(a.isEmpty)
    • assert(!a.isEmpty)
    • assert(a.isInstanceOf[String])
    • assert(a.length == 8)
    • assert(a.size == 8)
    • assert(a.exists(_ == 8))

    At this time, any other form of expression will get a TestFailedException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean, not Option[String] to be the default in tests. This makes === consistent between tests and production code. If you have pre-existing code you wrote under ScalaTest 1.x, in which you are expecting=== to return an Option[String], use can get that behavior back by mixing in trait LegacyTripleEquals.

    condition

    the boolean condition to assert

    Definition Classes
    Assertions
    Exceptions thrown
    TestFailedException

    if the condition is false.

  14. macro def assertCompiles(code: String): Unit

    Asserts that a given string snippet of code passes both the Scala parser and type checker.

    Asserts that a given string snippet of code passes both the Scala parser and type checker.

    You can use this to make sure a snippet of code compiles:

    assertCompiles("val a: Int = 1")
    

    Although assertCompiles is implemented with a macro that determines at compile time whether the snippet of code represented by the passed string compiles, errors (i.e., snippets of code that do not compile) are reported as test failures at runtime.

    code

    the snippet of code that should compile

    Definition Classes
    Assertions
  15. macro def assertDoesNotCompile(code: String): Unit

    Asserts that a given string snippet of code does not pass either the Scala parser or type checker.

    Asserts that a given string snippet of code does not pass either the Scala parser or type checker.

    Often when creating libraries you may wish to ensure that certain arrangements of code that represent potential “user errors” do not compile, so that your library is more error resistant. ScalaTest's Assertions trait includes the following syntax for that purpose:

    assertDoesNotCompile("val a: String = \"a string")
    

    Although assertDoesNotCompile is implemented with a macro that determines at compile time whether the snippet of code represented by the passed string doesn't compile, errors (i.e., snippets of code that do compile) are reported as test failures at runtime.

    Note that the difference between assertTypeError and assertDoesNotCompile is that assertDoesNotCompile will succeed if the given code does not compile for any reason, whereas assertTypeError will only succeed if the given code does not compile because of a type error. If the given code does not compile because of a syntax error, for example, assertDoesNotCompile will return normally but assertTypeError will throw a TestFailedException.

    code

    the snippet of code that should not type check

    Definition Classes
    Assertions
  16. def assertResult(expected: Any)(actual: Any): Unit

    Assert that the value passed as expected equals the value passed as actual.

    Assert that the value passed as expected equals the value passed as actual. If the actual value equals the expected value (as determined by ==), assertResult returns normally. Else, assertResult throws a TestFailedException whose detail message includes the expected and actual values.

    expected

    the expected value

    actual

    the actual value, which should equal the passed expected value

    Definition Classes
    Assertions
    Exceptions thrown
    TestFailedException

    if the passed actual value does not equal the passed expected value.

  17. def assertResult(expected: Any, clue: Any)(actual: Any): Unit

    Assert that the value passed as expected equals the value passed as actual.

    Assert that the value passed as expected equals the value passed as actual. If the actual equals the expected (as determined by ==), assertResult returns normally. Else, if actual is not equal to expected, assertResult throws a TestFailedException whose detail message includes the expected and actual values, as well as the String obtained by invoking toString on the passed clue.

    expected

    the expected value

    clue

    An object whose toString method returns a message to include in a failure report.

    actual

    the actual value, which should equal the passed expected value

    Definition Classes
    Assertions
    Exceptions thrown
    TestFailedException

    if the passed actual value does not equal the passed expected value.

  18. macro def assertTypeError(code: String): Unit

    Asserts that a given string snippet of code does not pass the Scala type checker, failing if the given snippet does not pass the Scala parser.

    Asserts that a given string snippet of code does not pass the Scala type checker, failing if the given snippet does not pass the Scala parser.

    Often when creating libraries you may wish to ensure that certain arrangements of code that represent potential “user errors” do not compile, so that your library is more error resistant. ScalaTest's Assertions trait includes the following syntax for that purpose:

    assertTypeError("val a: String = 1")
    

    Although assertTypeError is implemented with a macro that determines at compile time whether the snippet of code represented by the passed string type checks, errors (i.e., snippets of code that do type check) are reported as test failures at runtime.

    Note that the difference between assertTypeError and assertDoesNotCompile is that assertDoesNotCompile will succeed if the given code does not compile for any reason, whereas assertTypeError will only succeed if the given code does not compile because of a type error. If the given code does not compile because of a syntax error, for example, assertDoesNotCompile will return normally but assertTypeError will throw a TestFailedException.

    code

    the snippet of code that should not type check

    Definition Classes
    Assertions
  19. val assertionsHelper: AssertionsHelper

    Helper instance used by code generated by macro assertion.

    Helper instance used by code generated by macro assertion.

    Definition Classes
    Assertions
  20. macro def assume(condition: Boolean, clue: Any): Unit

    Assume that a boolean condition, described in String message, is true.

    Assume that a boolean condition, described in String message, is true. If the condition is true, this method returns normally. Else, it throws TestCanceledException with a helpful error message appended with String obtained by invoking toString on the specified clue as the exception's detail message.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assume(a == b, "a good clue")
    • assume(a != b, "a good clue")
    • assume(a === b, "a good clue")
    • assume(a !== b, "a good clue")
    • assume(a > b, "a good clue")
    • assume(a >= b, "a good clue")
    • assume(a < b, "a good clue")
    • assume(a <= b, "a good clue")
    • assume(a startsWith "prefix", "a good clue")
    • assume(a endsWith "postfix", "a good clue")
    • assume(a contains "something", "a good clue")
    • assume(a eq b, "a good clue")
    • assume(a ne b, "a good clue")
    • assume(a > 0 && b > 5, "a good clue")
    • assume(a > 0 || b > 5, "a good clue")
    • assume(a.isEmpty, "a good clue")
    • assume(!a.isEmpty, "a good clue")
    • assume(a.isInstanceOf[String], "a good clue")
    • assume(a.length == 8, "a good clue")
    • assume(a.size == 8, "a good clue")
    • assume(a.exists(_ == 8), "a good clue")

    At this time, any other form of expression will just get a TestCanceledException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean, not Option[String] to be the default in tests. This makes === consistent between tests and production code. If you have pre-existing code you wrote under ScalaTest 1.x, in which you are expecting=== to return an Option[String], use can get that behavior back by mixing in trait LegacyTripleEquals.

    condition

    the boolean condition to assume

    clue

    An objects whose toString method returns a message to include in a failure report.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if message is null.

    TestCanceledException

    if the condition is false.

  21. macro def assume(condition: Boolean): Unit

    Assume that a boolean condition is true.

    Assume that a boolean condition is true. If the condition is true, this method returns normally. Else, it throws TestCanceledException.

    This method is implemented in terms of a Scala macro that will generate a more helpful error message for expressions of this form:

    • assume(a == b)
    • assume(a != b)
    • assume(a === b)
    • assume(a !== b)
    • assume(a > b)
    • assume(a >= b)
    • assume(a < b)
    • assume(a <= b)
    • assume(a startsWith "prefix")
    • assume(a endsWith "postfix")
    • assume(a contains "something")
    • assume(a eq b)
    • assume(a ne b)
    • assume(a > 0 && b > 5)
    • assume(a > 0 || b > 5)
    • assume(a.isEmpty)
    • assume(!a.isEmpty)
    • assume(a.isInstanceOf[String])
    • assume(a.length == 8)
    • assume(a.size == 8)
    • assume(a.exists(_ == 8))

    At this time, any other form of expression will just get a TestCanceledException with message saying the given expression was false. In the future, we will enhance this macro to give helpful error messages in more situations. In ScalaTest 2.0, however, this behavior was sufficient to allow the === that returns Boolean, not Option[String] to be the default in tests. This makes === consistent between tests and production code. If you have pre-existing code you wrote under ScalaTest 1.x, in which you are expecting=== to return an Option[String], use can get that behavior back by mixing in trait LegacyTripleEquals.

    condition

    the boolean condition to assume

    Definition Classes
    Assertions
    Exceptions thrown
    TestCanceledException

    if the condition is false.

  22. val behave: BehaveWord

    Supports shared test registration in FlatSpecs.

    Supports shared test registration in FlatSpecs.

    This field supports syntax such as the following:

    it should behave like nonFullStack(stackWithOneItem)
              ^
    

    For more information and examples of the use of behave, see the Shared tests section in the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  23. val behavior: BehaviorWord

    Supports the registration of a “subject” being specified and tested.

    Supports the registration of a “subject” being specified and tested.

    This field enables syntax such as the following subject registration:

    behavior of "A Stack"
    ^
    

    For more information and examples of the use of the behavior field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  24. def cancel(cause: Throwable): Nothing

    Throws TestCanceledException, with the passed Throwable cause, to indicate a test failed.

    Throws TestCanceledException, with the passed Throwable cause, to indicate a test failed. The getMessage method of the thrown TestCanceledException will return cause.toString.

    cause

    a Throwable that indicates the cause of the cancellation.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if cause is null

  25. def cancel(message: String, cause: Throwable): Nothing

    Throws TestCanceledException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    Throws TestCanceledException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    message

    A message describing the failure.

    cause

    A Throwable that indicates the cause of the failure.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if message or cause is null

  26. def cancel(message: String): Nothing

    Throws TestCanceledException, with the passed String message as the exception's detail message, to indicate a test was canceled.

    Throws TestCanceledException, with the passed String message as the exception's detail message, to indicate a test was canceled.

    message

    A message describing the cancellation.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if message is null

  27. def cancel(): Nothing

    Throws TestCanceledException to indicate a test was canceled.

    Throws TestCanceledException to indicate a test was canceled.

    Definition Classes
    Assertions
  28. def clone(): AnyRef

    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  29. def conversionCheckedConstraint[A, B](implicit equivalenceOfA: Equivalence[A], cnv: (B) ⇒ A): Constraint[A, B]

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that B is implicitly convertible to A, given an implicit Equivalence[A].

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that B is implicitly convertible to A, given an implicit Equivalence[A].

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[A]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits ConversionCheckedTripleEquals) and ConversionCheckedLegacyTripleEquals, and overriden as non-implicit by the other subtraits in this package.

    equivalenceOfA

    an Equivalence[A] type class to which the Constraint.areEqual method will delegate to determine equality.

    cnv

    an implicit conversion from B to A

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[A].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  30. def convertEquivalenceToAToBConstraint[A, B](equivalenceOfB: Equivalence[B])(implicit ev: <:<[A, B]): Constraint[A, B]

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that A must be a subtype of B, given an explicit Equivalence[B].

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that A must be a subtype of B, given an explicit Equivalence[B].

    This method is used to enable the Explicitly DSL for TypeCheckedTripleEquals by requiring an explicit Equivalance[B], but taking an implicit function that provides evidence that A is a subtype of B.

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[B]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits LowPriorityTypeCheckedConstraint (extended by TypeCheckedTripleEquals), and LowPriorityTypeCheckedLegacyConstraint (extended by TypeCheckedLegacyTripleEquals), and overriden as non-implicit by the other subtraits in this package.

    equivalenceOfB

    an Equivalence[B] type class to which the Constraint.areEqual method will delegate to determine equality.

    ev

    evidence that A is a subype of B

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[B].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  31. def convertEquivalenceToAToBConversionConstraint[A, B](equivalenceOfB: Equivalence[B])(implicit ev: (A) ⇒ B): Constraint[A, B]

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that A is implicitly convertible to B, given an explicit Equivalence[B].

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that A is implicitly convertible to B, given an explicit Equivalence[B].

    This method is used to enable the Explicitly DSL for ConversionCheckedTripleEquals by requiring an explicit Equivalance[B], but taking an implicit function that converts from A to B.

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[B]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits LowPriorityConversionCheckedConstraint (extended by ConversionCheckedTripleEquals), and LowPriorityConversionCheckedLegacyConstraint (extended by ConversionCheckedLegacyTripleEquals), and overriden as non-implicit by the other subtraits in this package.

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[B].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  32. def convertEquivalenceToBToAConstraint[A, B](equivalenceOfA: Equivalence[A])(implicit ev: <:<[B, A]): Constraint[A, B]

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that B must be a subtype of A, given an explicit Equivalence[A].

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that B must be a subtype of A, given an explicit Equivalence[A].

    This method is used to enable the Explicitly DSL for TypeCheckedTripleEquals by requiring an explicit Equivalance[B], but taking an implicit function that provides evidence that A is a subtype of B. For example, under TypeCheckedTripleEquals, this method (as an implicit method), would be used to compile this statement:

    def closeEnoughTo1(num: Double): Boolean =
      (num === 1.0)(decided by forgivingEquality)
    

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[A]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits TypeCheckedTripleEquals) and TypeCheckedLegacyTripleEquals, and overriden as non-implicit by the other subtraits in this package.

    ev

    evidence that B is a subype of A

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[A].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  33. def convertEquivalenceToBToAConversionConstraint[A, B](equivalenceOfA: Equivalence[A])(implicit ev: (B) ⇒ A): Constraint[A, B]

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that B is implicitly convertible to A, given an explicit Equivalence[A].

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that B is implicitly convertible to A, given an explicit Equivalence[A].

    This method is used to enable the Explicitly DSL for ConversionCheckedTripleEquals by requiring an explicit Equivalance[A], but taking an implicit function that converts from B to A. For example, under ConversionCheckedTripleEquals, this method (as an implicit method), would be used to compile this statement:

    def closeEnoughTo1(num: Double): Boolean =
      (num === 1.0)(decided by forgivingEquality)
    

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[A]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits ConversionCheckedTripleEquals) and ConversionCheckedLegacyTripleEquals, and overriden as non-implicit by the other subtraits in this package.

    equivalenceOfA

    an Equivalence[A] type class to which the Constraint.areEqual method will delegate to determine equality.

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[A].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  34. def convertToCheckingEqualizer[T](left: T): CheckingEqualizer[T]

    Converts to an CheckingEqualizer that provides === and !== operators that result in Boolean and enforce a type constraint.

    Converts to an CheckingEqualizer that provides === and !== operators that result in Boolean and enforce a type constraint.

    This method is overridden and made implicit by subtraits TypeCheckedTripleEquals and ConversionCheckedTripleEquals, and overriden as non-implicit by the other subtraits in this package.

    left

    the object whose type to convert to CheckingEqualizer.

    Definition Classes
    TripleEqualsTripleEqualsSupport
    Exceptions thrown
    NullPointerException

    if left is null.

  35. implicit def convertToEqualizer[T](left: T): Equalizer[T]

    Converts to an Equalizer that provides === and !== operators that result in Boolean and enforce no type constraint.

    Converts to an Equalizer that provides === and !== operators that result in Boolean and enforce no type constraint.

    This method is overridden and made implicit by subtrait TripleEquals and overriden as non-implicit by the other subtraits in this package.

    left

    the object whose type to convert to Equalizer.

    Definition Classes
    TripleEqualsTripleEqualsSupport
    Exceptions thrown
    NullPointerException

    if left is null.

  36. implicit def convertToInAndIgnoreMethods(resultOfStringPassedToVerb: ResultOfStringPassedToVerb): InAndIgnoreMethods

    Implicitly converts an object of type ResultOfStringPassedToVerb to an InAndIgnoreMethods, to enable in and ignore methods to be invokable on that object.

    Implicitly converts an object of type ResultOfStringPassedToVerb to an InAndIgnoreMethods, to enable in and ignore methods to be invokable on that object.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  37. implicit def convertToInAndIgnoreMethodsAfterTaggedAs(resultOfTaggedAsInvocation: ResultOfTaggedAsInvocation): InAndIgnoreMethodsAfterTaggedAs

    Implicitly converts an object of type ResultOfTaggedAsInvocation to an InAndIgnoreMethodsAfterTaggedAs, to enable in and ignore methods to be invokable on that object.

    Implicitly converts an object of type ResultOfTaggedAsInvocation to an InAndIgnoreMethodsAfterTaggedAs, to enable in and ignore methods to be invokable on that object.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  38. def convertToLegacyCheckingEqualizer[T](left: T): LegacyCheckingEqualizer[T]

    Converts to a LegacyCheckingEqualizer that provides === and !== operators that result in Option[String] and enforce a type constraint.

    Converts to a LegacyCheckingEqualizer that provides === and !== operators that result in Option[String] and enforce a type constraint.

    This method is overridden and made implicit by subtraits TypeCheckedLegacyTripleEquals and ConversionCheckedLegacyTripleEquals, and overriden as non-implicit by the other subtraits in this package.

    left

    the object whose type to convert to LegacyCheckingEqualizer.

    Definition Classes
    TripleEqualsTripleEqualsSupport
    Exceptions thrown
    NullPointerException

    if left is null.

  39. def convertToLegacyEqualizer[T](left: T): LegacyEqualizer[T]

    Converts to a LegacyEqualizer that provides === and !== operators that result in Option[String] and enforce no type constraint.

    Converts to a LegacyEqualizer that provides === and !== operators that result in Option[String] and enforce no type constraint.

    This method is overridden and made implicit by subtrait LegacyTripleEquals and overriden as non-implicit by the other subtraits in this package.

    left

    the object whose type to convert to LegacyEqualizer.

    Definition Classes
    TripleEqualsTripleEqualsSupport
    Exceptions thrown
    NullPointerException

    if left is null.

  40. implicit def convertToStringCanWrapper(o: String): StringCanWrapperForVerb

    Implicitly converts an object of type String to a StringCanWrapper, to enable can methods to be invokable on that object.

    Implicitly converts an object of type String to a StringCanWrapper, to enable can methods to be invokable on that object.

    Definition Classes
    CanVerb
  41. implicit def convertToStringMustWrapper(o: String): StringMustWrapperForVerb

    Implicitly converts an object of type String to a StringMustWrapper, to enable must methods to be invokable on that object.

    Implicitly converts an object of type String to a StringMustWrapper, to enable must methods to be invokable on that object.

    Definition Classes
    MustVerb
  42. implicit def convertToStringShouldWrapper(o: String): StringShouldWrapperForVerb

    Implicitly converts an object of type String to a StringShouldWrapperForVerb, to enable should methods to be invokable on that object.

    Implicitly converts an object of type String to a StringShouldWrapperForVerb, to enable should methods to be invokable on that object.

    Definition Classes
    ShouldVerb
  43. def defaultEquality[A]: Equality[A]

    Returns an Equality[A] for any type A that determines equality by first calling .deep on any Array (on either the left or right side), then comparing the resulting objects with ==.

    Returns an Equality[A] for any type A that determines equality by first calling .deep on any Array (on either the left or right side), then comparing the resulting objects with ==.

    returns

    a default Equality for type A

    Definition Classes
    TripleEqualsSupport
  44. final def eq(arg0: AnyRef): Boolean

    Definition Classes
    AnyRef
  45. def equals(arg0: Any): Boolean

    Definition Classes
    AnyRef → Any
  46. final def execute: Unit

    Executes this Suite, printing results to the standard output.

    Executes this Suite, printing results to the standard output.

    This method, which simply invokes the other overloaded form of execute with default parameter values, is intended for use only as a mini-DSL for the Scala interpreter. It allows you to execute a Suite in the interpreter with a minimum of finger typing:

    scala> new SetSpec execute
    An empty Set
    - should have size 0
    - should produce NoSuchElementException when head is invoked !!! IGNORED !!!
    

    If you do ever want to invoke execute outside the Scala interpreter, it is best style to invoke it with empty parens to indicate it has a side effect, like this:

    // Use empty parens form in regular code (outside the Scala interpreter)
    (new ExampleSuite).execute()
    

    Definition Classes
    Suite
  47. final def execute(testName: String = null, configMap: ConfigMap = ConfigMap.empty, color: Boolean = true, durations: Boolean = false, shortstacks: Boolean = false, fullstacks: Boolean = false, stats: Boolean = false): Unit

    Executes one or more tests in this Suite, printing results to the standard output.

    Executes one or more tests in this Suite, printing results to the standard output.

    This method invokes run on itself, passing in values that can be configured via the parameters to this method, all of which have default values. This behavior is convenient when working with ScalaTest in the Scala interpreter. Here's a summary of this method's parameters and how you can use them:

    The testName parameter

    If you leave testName at its default value (of null), this method will pass None to the testName parameter of run, and as a result all the tests in this suite will be executed. If you specify a testName, this method will pass Some(testName) to run, and only that test will be run. Thus to run all tests in a suite from the Scala interpreter, you can write:

    scala> new ExampleSuite execute
    

    (The above syntax actually invokes the overloaded parameterless form of execute, which calls this form with its default parameter values.) To run just the test named "my favorite test" in a suite from the Scala interpreter, you would write:

    scala> new ExampleSuite execute ("my favorite test")
    

    Or:

    scala> new ExampleSuite execute (testName = "my favorite test")
    

    The configMap parameter

    If you provide a value for the configMap parameter, this method will pass it to run. If not, the default value of an empty Map will be passed. For more information on how to use a config map to configure your test suites, see the config map section in the main documentation for this trait. Here's an example in which you configure a run with the name of an input file:

    scala> new ExampleSuite execute (configMap = Map("inputFileName" -> "in.txt")
    

    The color parameter

    If you leave the color parameter unspecified, this method will configure the reporter it passes to run to print to the standard output in color (via ansi escape characters). If you don't want color output, specify false for color, like this:

    scala> new ExampleSuite execute (color = false)
    

    The durations parameter

    If you leave the durations parameter unspecified, this method will configure the reporter it passes to run to not print durations for tests and suites to the standard output. If you want durations printed, specify true for durations, like this:

    scala> new ExampleSuite execute (durations = true)
    

    The shortstacks and fullstacks parameters

    If you leave both the shortstacks and fullstacks parameters unspecified, this method will configure the reporter it passes to run to not print stack traces for failed tests if it has a stack depth that identifies the offending line of test code. If you prefer a short stack trace (10 to 15 stack frames) to be printed with any test failure, specify true for shortstacks:

    scala> new ExampleSuite execute (shortstacks = true)
    

    For full stack traces, set fullstacks to true:

    scala> new ExampleSuite execute (fullstacks = true)
    

    If you specify true for both shortstacks and fullstacks, you'll get full stack traces.

    The stats parameter

    If you leave the stats parameter unspecified, this method will not fire RunStarting and either RunCompleted or RunAborted events to the reporter it passes to run. If you specify true for stats, this method will fire the run events to the reporter, and the reporter will print the expected test count before the run, and various statistics after, including the number of suites completed and number of tests that succeeded, failed, were ignored or marked pending. Here's how you get the stats:

    scala> new ExampleSuite execute (stats = true)
    

    To summarize, this method will pass to run:

    • testName - None if this method's testName parameter is left at its default value of null, else Some(testName).
    • reporter - a reporter that prints to the standard output
    • stopper - a Stopper whose apply method always returns false
    • filter - a Filter constructed with None for tagsToInclude and Set() for tagsToExclude
    • configMap - the configMap passed to this method
    • distributor - None
    • tracker - a new Tracker

    Note: In ScalaTest, the terms "execute" and "run" basically mean the same thing and can be used interchangably. The reason this method isn't named run is that it takes advantage of default arguments, and you can't mix overloaded methods and default arguments in Scala. (If named run, this method would have the same name but different arguments than the main run method that takes seven arguments. Thus it would overload and couldn't be used with default argument values.)

    Design note: This method has two "features" that may seem unidiomatic. First, the default value of testName is null. Normally in Scala the type of testName would be Option[String] and the default value would be None, as it is in this trait's run method. The null value is used here for two reasons. First, in ScalaTest 1.5, execute was changed from four overloaded methods to one method with default values, taking advantage of the default and named parameters feature introduced in Scala 2.8. To not break existing source code, testName needed to have type String, as it did in two of the overloaded execute methods prior to 1.5. The other reason is that execute has always been designed to be called primarily from an interpeter environment, such as the Scala REPL (Read-Evaluate-Print-Loop). In an interpreter environment, minimizing keystrokes is king. A String type with a null default value lets users type suite.execute("my test name") rather than suite.execute(Some("my test name")), saving several keystrokes.

    The second non-idiomatic feature is that shortstacks and fullstacks are all lower case rather than camel case. This is done to be consistent with the Shell, which also uses those forms. The reason lower case is used in the Shell is to save keystrokes in an interpreter environment. Most Unix commands, for example, are all lower case, making them easier and quicker to type. In the ScalaTest Shell, methods like shortstacks, fullstacks, and nostats, etc., are designed to be all lower case so they feel more like shell commands than methods.

    testName

    the name of one test to run.

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    color

    a boolean that configures whether output is printed in color

    durations

    a boolean that configures whether test and suite durations are printed to the standard output

    shortstacks

    a boolean that configures whether short stack traces should be printed for test failures

    fullstacks

    a boolean that configures whether full stack traces should be printed for test failures

    stats

    a boolean that configures whether test and suite statistics are printed to the standard output

    Definition Classes
    Suite
    Exceptions thrown
    IllegalArgumentException

    if testName is defined, but no test with the specified test name exists in this Suite

    NullPointerException

    if the passed configMap parameter is null.

  48. def expectedTestCount(filter: Filter): Int

    The total number of tests that are expected to run when this Suite's run method is invoked.

    The total number of tests that are expected to run when this Suite's run method is invoked.

    This trait's implementation of this method returns the sum of:

    • the size of the testNames List, minus the number of tests marked as ignored and any tests that are exluded by the passed Filter
    • the sum of the values obtained by invoking expectedTestCount on every nested Suite contained in nestedSuites
    filter

    a Filter with which to filter tests to count based on their tags

    Definition Classes
    SuiteAbstractSuite
  49. def fail(cause: Throwable): Nothing

    Throws TestFailedException, with the passed Throwable cause, to indicate a test failed.

    Throws TestFailedException, with the passed Throwable cause, to indicate a test failed. The getMessage method of the thrown TestFailedException will return cause.toString.

    cause

    a Throwable that indicates the cause of the failure.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if cause is null

  50. def fail(message: String, cause: Throwable): Nothing

    Throws TestFailedException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    Throws TestFailedException, with the passed String message as the exception's detail message and Throwable cause, to indicate a test failed.

    message

    A message describing the failure.

    cause

    A Throwable that indicates the cause of the failure.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if message or cause is null

  51. def fail(message: String): Nothing

    Throws TestFailedException, with the passed String message as the exception's detail message, to indicate a test failed.

    Throws TestFailedException, with the passed String message as the exception's detail message, to indicate a test failed.

    message

    A message describing the failure.

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if message is null

  52. def fail(): Nothing

    Throws TestFailedException to indicate a test failed.

    Throws TestFailedException to indicate a test failed.

    Definition Classes
    Assertions
  53. def finalize(): Unit

    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws( classOf[java.lang.Throwable] )
  54. final def getClass(): Class[_]

    Definition Classes
    AnyRef → Any
  55. def hashCode(): Int

    Definition Classes
    AnyRef → Any
  56. val ignore: IgnoreWord

    Supports registration of ignored tests in FlatSpecs.

    Supports registration of ignored tests in FlatSpecs.

    This field enables syntax such as the following registration of an ignored test:

    ignore should "pop values in last-in-first-out order" in { ... }
    ^
    

    For more information and examples of the use of the ignore field, see the Ignored tests section in the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  57. def info: Informer

    Returns an Informer that during test execution will forward strings passed to its apply method to the current reporter.

    Returns an Informer that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked from inside a scope, it will forward the information to the current reporter immediately. If invoked from inside a test function, it will record the information and forward it to the current reporter only after the test completed, as recordedEvents of the test completed event, such as TestSucceeded. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    FlatSpecLikeInforming
  58. def intercept[T <: AnyRef](f: ⇒ Any)(implicit manifest: Manifest[T]): T

    Intercept and return an exception that's expected to be thrown by the passed function value.

    Intercept and return an exception that's expected to be thrown by the passed function value. The thrown exception must be an instance of the type specified by the type parameter of this method. This method invokes the passed function. If the function throws an exception that's an instance of the specified type, this method returns that exception. Else, whether the passed function returns normally or completes abruptly with a different exception, this method throws TestFailedException.

    Note that the type specified as this method's type parameter may represent any subtype of AnyRef, not just Throwable or one of its subclasses. In Scala, exceptions can be caught based on traits they implement, so it may at times make sense to specify a trait that the intercepted exception's class must mix in. If a class instance is passed for a type that could not possibly be used to catch an exception (such as String, for example), this method will complete abruptly with a TestFailedException.

    f

    the function value that should throw the expected exception

    manifest

    an implicit Manifest representing the type of the specified type parameter.

    returns

    the intercepted exception, if it is of the expected type

    Definition Classes
    Assertions
    Exceptions thrown
    TestFailedException

    if the passed function does not complete abruptly with an exception that's an instance of the specified type passed expected value.

  59. final def isInstanceOf[T0]: Boolean

    Definition Classes
    Any
  60. val it: ItWord

    Supports test (and shared test) registration in FlatSpecs.

    Supports test (and shared test) registration in FlatSpecs.

    This field enables syntax such as the following test registration:

    it should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    it should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  61. def lowPriorityConversionCheckedConstraint[A, B](implicit equivalenceOfB: Equivalence[B], cnv: (A) ⇒ B): Constraint[A, B]

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that A is implicitly convertible to B, given an implicit Equivalence[B].

    Provides a Constraint[A, B] class for any two types A and B, enforcing the type constraint that A is implicitly convertible to B, given an implicit Equivalence[B].

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[B]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits LowPriorityConversionCheckedConstraint (extended by ConversionCheckedTripleEquals), and LowPriorityConversionCheckedLegacyConstraint (extended by ConversionCheckedLegacyTripleEquals), and overriden as non-implicit by the other subtraits in this package.

    cnv

    an implicit conversion from A to B

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[B].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  62. def lowPriorityTypeCheckedConstraint[A, B](implicit equivalenceOfB: Equivalence[B], ev: <:<[A, B]): Constraint[A, B]

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that A must be a subtype of B, given an implicit Equivalence[B].

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that A must be a subtype of B, given an implicit Equivalence[B].

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[A]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits LowPriorityTypeCheckedConstraint (extended by TypeCheckedTripleEquals), and LowPriorityTypeCheckedLegacyConstraint (extended by TypeCheckedLegacyTripleEquals), and overriden as non-implicit by the other subtraits in this package.

    equivalenceOfB

    an Equivalence[B] type class to which the Constraint.areEqual method will delegate to determine equality.

    ev

    evidence that A is a subype of B

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[B].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  63. def markup: Documenter

    Returns a Documenter that during test execution will forward strings passed to its apply method to the current reporter.

    Returns a Documenter that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked from inside a scope, it will forward the information to the current reporter immediately. If invoked from inside a test function, it will record the information and forward it to the current reporter only after the test completed, as recordedEvents of the test completed event, such as TestSucceeded. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    FlatSpecLikeDocumenting
  64. final def ne(arg0: AnyRef): Boolean

    Definition Classes
    AnyRef
  65. def nestedSuites: IndexedSeq[Suite]

    An immutable IndexedSeq of this Suite object's nested Suites.

    An immutable IndexedSeq of this Suite object's nested Suites. If this Suite contains no nested Suites, this method returns an empty IndexedSeq. This trait's implementation of this method returns an empty List.

    Definition Classes
    SuiteAbstractSuite
  66. def note: Notifier

    Returns a Notifier that during test execution will forward strings passed to its apply method to the current reporter.

    Returns a Notifier that during test execution will forward strings passed to its apply method to the current reporter. If invoked in a constructor, it will register the passed string for forwarding later during test execution. If invoked while this FlatSpec is being executed, such as from inside a test function, it will forward the information to the current reporter immediately. If invoked at any other time, it will print to the standard output. This method can be called safely by any thread.

    Attributes
    protected
    Definition Classes
    FlatSpecLikeNotifying
  67. final def notify(): Unit

    Definition Classes
    AnyRef
  68. final def notifyAll(): Unit

    Definition Classes
    AnyRef
  69. def pending: PendingNothing

    Throws TestPendingException to indicate a test is pending.

    Throws TestPendingException to indicate a test is pending.

    A pending test is one that has been given a name but is not yet implemented. The purpose of pending tests is to facilitate a style of testing in which documentation of behavior is sketched out before tests are written to verify that behavior (and often, the before the behavior of the system being tested is itself implemented). Such sketches form a kind of specification of what tests and functionality to implement later.

    To support this style of testing, a test can be given a name that specifies one bit of behavior required by the system being tested. The test can also include some code that sends more information about the behavior to the reporter when the tests run. At the end of the test, it can call method pending, which will cause it to complete abruptly with TestPendingException. Because tests in ScalaTest can be designated as pending with TestPendingException, both the test name and any information sent to the reporter when running the test can appear in the report of a test run. (In other words, the code of a pending test is executed just like any other test.) However, because the test completes abruptly with TestPendingException, the test will be reported as pending, to indicate the actual test, and possibly the functionality it is intended to test, has not yet been implemented.

    Note: This method always completes abruptly with a TestPendingException. Thus it always has a side effect. Methods with side effects are usually invoked with parentheses, as in pending(). This method is defined as a parameterless method, in flagrant contradiction to recommended Scala style, because it forms a kind of DSL for pending tests. It enables tests in suites such as FunSuite or FunSpec to be denoted by placing "(pending)" after the test name, as in:

    test("that style rules are not laws") (pending)
    

    Readers of the code see "pending" in parentheses, which looks like a little note attached to the test name to indicate it is pending. Whereas "(pending()) looks more like a method call, "(pending)" lets readers stay at a higher level, forgetting how it is implemented and just focusing on the intent of the programmer who wrote the code.

    Definition Classes
    Suite
  70. def pendingUntilFixed(f: ⇒ Unit): Unit

    Execute the passed block of code, and if it completes abruptly, throw TestPendingException, else throw TestFailedException.

    Execute the passed block of code, and if it completes abruptly, throw TestPendingException, else throw TestFailedException.

    This method can be used to temporarily change a failing test into a pending test in such a way that it will automatically turn back into a failing test once the problem originally causing the test to fail has been fixed. At that point, you need only remove the pendingUntilFixed call. In other words, a pendingUntilFixed surrounding a block of code that isn't broken is treated as a test failure. The motivation for this behavior is to encourage people to remove pendingUntilFixed calls when there are no longer needed.

    This method facilitates a style of testing in which tests are written before the code they test. Sometimes you may encounter a test failure that requires more functionality than you want to tackle without writing more tests. In this case you can mark the bit of test code causing the failure with pendingUntilFixed. You can then write more tests and functionality that eventually will get your production code to a point where the original test won't fail anymore. At this point the code block marked with pendingUntilFixed will no longer throw an exception (because the problem has been fixed). This will in turn cause pendingUntilFixed to throw TestFailedException with a detail message explaining you need to go back and remove the pendingUntilFixed call as the problem orginally causing your test code to fail has been fixed.

    f

    a block of code, which if it completes abruptly, should trigger a TestPendingException

    Definition Classes
    Suite
    Exceptions thrown
    TestPendingException

    if the passed block of code completes abruptly with an Exception or AssertionError

  71. final def registerIgnoredTest(testText: String, testTags: Tag*)(testFun: ⇒ Unit): Unit

    Register an ignored test, note that an ignored test will not be executed, but it will cause a TestIgnored event to be fired.

    Register an ignored test, note that an ignored test will not be executed, but it will cause a TestIgnored event to be fired.

    testText

    the test text

    testTags

    the test tags

    testFun

    the test function

    Definition Classes
    FlatSpecLikeTestRegistration
  72. final def registerTest(testText: String, testTags: Tag*)(testFun: ⇒ Unit): Unit

    Register a test.

    Register a test.

    testText

    the test text

    testTags

    the test tags

    testFun

    the test function

    Definition Classes
    FlatSpecLikeTestRegistration
  73. def rerunner: Option[String]

    The fully qualified class name of the rerunner to rerun this suite.

    The fully qualified class name of the rerunner to rerun this suite. This implementation will look at this.getClass and see if it is either an accessible Suite, or it has a WrapWith annotation. If so, it returns the fully qualified class name wrapped in a Some, or else it returns None.

    Definition Classes
    SuiteAbstractSuite
  74. def run(testName: Option[String], args: Args): Status

    Runs this suite of tests.

    Runs this suite of tests.

    If testName is None, this trait's implementation of this method calls these two methods on this object in this order:

    • runNestedSuites
    • runTests

    If testName is defined, then this trait's implementation of this method calls runTests, but does not call runNestedSuites. This behavior is part of the contract of this method. Subclasses that override run must take care not to call runNestedSuites if testName is defined. (The OneInstancePerTest trait depends on this behavior, for example.)

    Subclasses and subtraits that override this run method can implement them without invoking either the runTests or runNestedSuites methods, which are invoked by this trait's implementation of this method. It is recommended, but not required, that subclasses and subtraits that override run in a way that does not invoke runNestedSuites also override runNestedSuites and make it final. Similarly it is recommended, but not required, that subclasses and subtraits that override run in a way that does not invoke runTests also override runTests (and runTest, which this trait's implementation of runTests calls) and make it final. The implementation of these final methods can either invoke the superclass implementation of the method, or throw an UnsupportedOperationException if appropriate. The reason for this recommendation is that ScalaTest includes several traits that override these methods to allow behavior to be mixed into a Suite. For example, trait BeforeAndAfterEach overrides runTestss. In a Suite subclass that no longer invokes runTests from run, the BeforeAndAfterEach trait is not applicable. Mixing it in would have no effect. By making runTests final in such a Suite subtrait, you make the attempt to mix BeforeAndAfterEach into a subclass of your subtrait a compiler error. (It would fail to compile with a complaint that BeforeAndAfterEach is trying to override runTests, which is a final method in your trait.)

    testName

    an optional name of one test to run. If None, all relevant tests should be run. I.e., None acts like a wildcard that means run all relevant tests in this Suite.

    args

    the Args for this run

    returns

    a Status object that indicates when all tests and nested suites started by this method have completed, and whether or not a failure occurred.

    Definition Classes
    FlatSpecLikeSuiteAbstractSuite
    Exceptions thrown
    IllegalArgumentException

    if testName is defined, but no test with the specified test name exists in this Suite

    NullPointerException

    if any passed parameter is null.

  75. final def run(testName: Option[String], reporter: Reporter, stopper: Stopper, filter: Filter, configMap: Map[String, Any], distributor: Option[Distributor], tracker: Tracker): Status

    This overloaded form of run has been deprecated and will be removed in a future version of ScalaTest. Please use the run method that takes two parameters instead.

    This overloaded form of run has been deprecated and will be removed in a future version of ScalaTest. Please use the run method that takes two parameters instead.

    This final implementation of this method constructs a Args instance from the passed reporter, stopper, filter, configMap, distributor, and tracker, and invokes the overloaded run method that takes two parameters, passing in the specified testName and the newly constructed Args. This method implementation enables existing code that called into the old run method to continue to work during the deprecation cycle. Subclasses and subtraits that overrode this method, however, will need to be changed to use the new two-parameter form instead.

    testName

    an optional name of one test to execute. If None, all relevant tests should be executed. I.e., None acts like a wildcard that means execute all relevant tests in this Suite.

    reporter

    the Reporter to which results will be reported

    stopper

    the Stopper that will be consulted to determine whether to stop execution early.

    filter

    a Filter with which to filter tests based on their tags

    configMap

    a Map of key-value pairs that can be used by the executing Suite of tests.

    distributor

    an optional Distributor, into which to put nested Suites to be executed by another entity, such as concurrently by a pool of threads. If None, nested Suites will be executed sequentially.

    tracker

    a Tracker tracking Ordinals being fired by the current thread.

    Definition Classes
    AbstractSuite
    Exceptions thrown
    NullPointerException

    if any passed parameter is null.

  76. def runNestedSuites(args: Args): Status

    Run zero to many of this Suite's nested Suites.

    Run zero to many of this Suite's nested Suites.

    If the passed distributor is None, this trait's implementation of this method invokes run on each nested Suite in the List obtained by invoking nestedSuites. If a nested Suite's run method completes abruptly with an exception, this trait's implementation of this method reports that the Suite aborted and attempts to run the next nested Suite. If the passed distributor is defined, this trait's implementation puts each nested Suite into the Distributor contained in the Some, in the order in which the Suites appear in the List returned by nestedSuites, passing in a new Tracker obtained by invoking nextTracker on the Tracker passed to this method.

    Implementations of this method are responsible for ensuring SuiteStarting events are fired to the Reporter before executing any nested Suite, and either SuiteCompleted or SuiteAborted after executing any nested Suite.

    args

    the Args for this run

    returns

    a Status object that indicates when all nested suites started by this method have completed, and whether or not a failure occurred.

    Attributes
    protected
    Definition Classes
    SuiteAbstractSuite
    Exceptions thrown
    NullPointerException

    if any passed parameter is null.

  77. def runTest(testName: String, args: Args): Status

    Run a test.

    Run a test. This trait's implementation runs the test registered with the name specified by testName. Each test's name is a concatenation of the text of all describers surrounding a test, from outside in, and the test's spec text, with one space placed between each item. (See the documenation for testNames for an example.)

    testName

    the name of one test to execute.

    args

    the Args for this run

    returns

    a Status object that indicates when the test started by this method has completed, and whether or not it failed .

    Attributes
    protected
    Definition Classes
    FlatSpecLikeSuiteAbstractSuite
    Exceptions thrown
    NullPointerException

    if any of testName, reporter, stopper, or configMap is null.

  78. def runTests(testName: Option[String], args: Args): Status

    Run zero to many of this FlatSpec's tests.

    Run zero to many of this FlatSpec's tests.

    This method takes a testName parameter that optionally specifies a test to invoke. If testName is Some, this trait's implementation of this method invokes runTest on this object, passing in:

    • testName - the String value of the testName Option passed to this method
    • reporter - the Reporter passed to this method, or one that wraps and delegates to it
    • stopper - the Stopper passed to this method, or one that wraps and delegates to it
    • configMap - the configMap passed to this method, or one that wraps and delegates to it

    This method takes a Set of tag names that should be included (tagsToInclude), and a Set that should be excluded (tagsToExclude), when deciding which of this Suite's tests to execute. If tagsToInclude is empty, all tests will be executed except those those belonging to tags listed in the tagsToExclude Set. If tagsToInclude is non-empty, only tests belonging to tags mentioned in tagsToInclude, and not mentioned in tagsToExclude will be executed. However, if testName is Some, tagsToInclude and tagsToExclude are essentially ignored. Only if testName is None will tagsToInclude and tagsToExclude be consulted to determine which of the tests named in the testNames Set should be run. For more information on trait tags, see the main documentation for this trait.

    If testName is None, this trait's implementation of this method invokes testNames on this Suite to get a Set of names of tests to potentially execute. (A testNames value of None essentially acts as a wildcard that means all tests in this Suite that are selected by tagsToInclude and tagsToExclude should be executed.) For each test in the testName Set, in the order they appear in the iterator obtained by invoking the elements method on the Set, this trait's implementation of this method checks whether the test should be run based on the tagsToInclude and tagsToExclude Sets. If so, this implementation invokes runTest, passing in:

    • testName - the String name of the test to run (which will be one of the names in the testNames Set)
    • reporter - the Reporter passed to this method, or one that wraps and delegates to it
    • stopper - the Stopper passed to this method, or one that wraps and delegates to it
    • configMap - the configMap passed to this method, or one that wraps and delegates to it
    testName

    an optional name of one test to execute. If None, all relevant tests should be executed. I.e., None acts like a wildcard that means execute all relevant tests in this FlatSpec.

    args

    the Args for this run

    returns

    a Status object that indicates when all tests started by this method have completed, and whether or not a failure occurred.

    Attributes
    protected
    Definition Classes
    FlatSpecLikeSuiteAbstractSuite
    Exceptions thrown
    NullPointerException

    if any of testName, reporter, stopper, tagsToInclude, tagsToExclude, or configMap is null.

  79. implicit val shorthandSharedTestRegistrationFunction: (String) ⇒ BehaveWord

    Supports the shorthand form of shared test registration.

    Supports the shorthand form of shared test registration.

    For example, this method enables syntax such as the following in:

    "A Stack (with one item)" should behave like nonEmptyStack(stackWithOneItem, lastValuePushed)
                              ^
    

    This function is passed as an implicit parameter to a should method provided in ShouldVerb, a must method provided in MustVerb, and a can method provided in CanVerb. When invoked, this function registers the subject description (the parameter to the function) and returns a BehaveWord.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  80. implicit val shorthandTestRegistrationFunction: (String, String, String) ⇒ ResultOfStringPassedToVerb

    Supports the shorthand form of test registration.

    Supports the shorthand form of test registration.

    For example, this method enables syntax such as the following:

    "A Stack (when empty)" should "be empty" in { ... }
                           ^
    

    This function is passed as an implicit parameter to a should method provided in ShouldVerb, a must method provided in MustVerb, and a can method provided in CanVerb. When invoked, this function registers the subject description (the first parameter to the function) and returns a ResultOfStringPassedToVerb initialized with the verb and rest parameters (the second and third parameters to the function, respectively).

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  81. final val styleName: String

    Suite style name.

    Suite style name.

    Definition Classes
    FlatSpecLikeSuiteAbstractSuite
  82. def suiteId: String

    A string ID for this Suite that is intended to be unique among all suites reported during a run.

    A string ID for this Suite that is intended to be unique among all suites reported during a run.

    This trait's implementation of this method returns the fully qualified name of this object's class. Each suite reported during a run will commonly be an instance of a different Suite class, and in such cases, this default implementation of this method will suffice. However, in special cases you may need to override this method to ensure it is unique for each reported suite. For example, if you write a Suite subclass that reads in a file whose name is passed to its constructor and dynamically creates a suite of tests based on the information in that file, you will likely need to override this method in your Suite subclass, perhaps by appending the pathname of the file to the fully qualified class name. That way if you run a suite of tests based on a directory full of these files, you'll have unique suite IDs for each reported suite.

    The suite ID is intended to be unique, because ScalaTest does not enforce that it is unique. If it is not unique, then you may not be able to uniquely identify a particular test of a particular suite. This ability is used, for example, to dynamically tag tests as having failed in the previous run when rerunning only failed tests.

    returns

    this Suite object's ID.

    Definition Classes
    Suite
  83. def suiteName: String

    A user-friendly suite name for this Suite.

    A user-friendly suite name for this Suite.

    This trait's implementation of this method returns the simple name of this object's class. This trait's implementation of runNestedSuites calls this method to obtain a name for Reports to pass to the suiteStarting, suiteCompleted, and suiteAborted methods of the Reporter.

    returns

    this Suite object's suite name.

    Definition Classes
    Suite
  84. final def synchronized[T0](arg0: ⇒ T0): T0

    Definition Classes
    AnyRef
  85. def tags: Map[String, Set[String]]

    A Map whose keys are String names of tagged tests and whose associated values are the Set of tags for the test.

    A Map whose keys are String names of tagged tests and whose associated values are the Set of tags for the test. If this FlatSpec contains no tags, this method returns an empty Map.

    This trait's implementation returns tags that were passed as strings contained in Tag objects passed to taggedAs.

    In addition, this trait's implementation will also auto-tag tests with class level annotations. For example, if you annotate @Ignore at the class level, all test methods in the class will be auto-annotated with org.scalatest.Ignore.

    Definition Classes
    FlatSpecLikeSuiteAbstractSuite
  86. def testDataFor(testName: String, theConfigMap: ConfigMap = ConfigMap.empty): TestData

    Provides a TestData instance for the passed test name, given the passed config map.

    Provides a TestData instance for the passed test name, given the passed config map.

    This method is used to obtain a TestData instance to pass to withFixture(NoArgTest) and withFixture(OneArgTest) and the beforeEach and afterEach methods of trait BeforeAndAfterEach.

    testName

    the name of the test for which to return a TestData instance

    theConfigMap

    the config map to include in the returned TestData

    returns

    a TestData instance for the specified test, which includes the specified config map

    Definition Classes
    FlatSpecLikeSuite
  87. def testNames: Set[String]

    An immutable Set of test names.

    An immutable Set of test names. If this FlatSpec contains no tests, this method returns an empty Set.

    This trait's implementation of this method will return a set that contains the names of all registered tests. The set's iterator will return those names in the order in which the tests were registered. Each test's name is composed of the concatenation of the text of each surrounding describer, in order from outside in, and the text of the example itself, with all components separated by a space. For example, consider this FlatSpec:

    import org.scalatest.FlatSpec
    
    class StackSpec extends FlatSpec {
    "A Stack (when not empty)" must "allow me to pop" in {} it must "not be empty" in {}
    "A Stack (when not full)" must "allow me to push" in {} it must "not be full" in {} }
    Invoking testNames on this FlatSpec will yield a set that contains the following two test name strings:
    "A Stack (when not empty) must allow me to pop"
    "A Stack (when not empty) must not be empty"
    "A Stack (when not full) must allow me to push"
    "A Stack (when not full) must not be full"
    

    Definition Classes
    FlatSpecLikeSuiteAbstractSuite
  88. val they: TheyWord

    Supports test (and shared test) registration in FlatSpecs.

    Supports test (and shared test) registration in FlatSpecs.

    This field enables syntax such as the following test registration:

    they should "pop values in last-in-first-out order" in { ... }
    ^
    

    It also enables syntax such as the following shared test registration:

    they should behave like nonEmptyStack(lastItemPushed)
    ^
    

    For more information and examples of the use of the it field, see the main documentation for this trait.

    Attributes
    protected
    Definition Classes
    FlatSpecLike
  89. def toString(): String

    Returns a user friendly string for this suite, composed of the simple name of the class (possibly simplified further by removing dollar signs if added by the Scala interpeter) and, if this suite contains nested suites, the result of invoking toString on each of the nested suites, separated by commas and surrounded by parentheses.

    Returns a user friendly string for this suite, composed of the simple name of the class (possibly simplified further by removing dollar signs if added by the Scala interpeter) and, if this suite contains nested suites, the result of invoking toString on each of the nested suites, separated by commas and surrounded by parentheses.

    returns

    a user-friendly string for this suite

    Definition Classes
    FlatSpec → AnyRef → Any
  90. def trap[T](f: ⇒ T): Throwable

    Trap and return any thrown exception that would normally cause a ScalaTest test to fail, or create and return a new RuntimeException indicating no exception is thrown.

    Trap and return any thrown exception that would normally cause a ScalaTest test to fail, or create and return a new RuntimeException indicating no exception is thrown.

    This method is intended to be used in the Scala interpreter to eliminate large stack traces when trying out ScalaTest assertions and matcher expressions. It is not intended to be used in regular test code. If you want to ensure that a bit of code throws an expected exception, use intercept, not trap. Here's an example interpreter session without trap:

    scala> import org.scalatest._
    import org.scalatest._
    
    scala> import Matchers._
    import Matchers._
    
    scala> val x = 12
    a: Int = 12
    
    scala> x shouldEqual 13
    org.scalatest.exceptions.TestFailedException: 12 did not equal 13
       at org.scalatest.Assertions$class.newAssertionFailedException(Assertions.scala:449)
       at org.scalatest.Assertions$.newAssertionFailedException(Assertions.scala:1203)
       at org.scalatest.Assertions$AssertionsHelper.macroAssertTrue(Assertions.scala:417)
       at .<init>(<console>:15)
       at .<clinit>(<console>)
       at .<init>(<console>:7)
       at .<clinit>(<console>)
       at $print(<console>)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
       at java.lang.reflect.Method.invoke(Method.java:597)
       at scala.tools.nsc.interpreter.IMain$ReadEvalPrint.call(IMain.scala:731)
       at scala.tools.nsc.interpreter.IMain$Request.loadAndRun(IMain.scala:980)
       at scala.tools.nsc.interpreter.IMain.loadAndRunReq$1(IMain.scala:570)
       at scala.tools.nsc.interpreter.IMain.interpret(IMain.scala:601)
       at scala.tools.nsc.interpreter.IMain.interpret(IMain.scala:565)
       at scala.tools.nsc.interpreter.ILoop.reallyInterpret$1(ILoop.scala:745)
       at scala.tools.nsc.interpreter.ILoop.interpretStartingWith(ILoop.scala:790)
       at scala.tools.nsc.interpreter.ILoop.command(ILoop.scala:702)
       at scala.tools.nsc.interpreter.ILoop.processLine$1(ILoop.scala:566)
       at scala.tools.nsc.interpreter.ILoop.innerLoop$1(ILoop.scala:573)
       at scala.tools.nsc.interpreter.ILoop.loop(ILoop.scala:576)
       at scala.tools.nsc.interpreter.ILoop$$anonfun$process$1.apply$mcZ$sp(ILoop.scala:867)
       at scala.tools.nsc.interpreter.ILoop$$anonfun$process$1.apply(ILoop.scala:822)
       at scala.tools.nsc.interpreter.ILoop$$anonfun$process$1.apply(ILoop.scala:822)
       at scala.tools.nsc.util.ScalaClassLoader$.savingContextLoader(ScalaClassLoader.scala:135)
       at scala.tools.nsc.interpreter.ILoop.process(ILoop.scala:822)
       at scala.tools.nsc.MainGenericRunner.runTarget$1(MainGenericRunner.scala:83)
       at scala.tools.nsc.MainGenericRunner.process(MainGenericRunner.scala:96)
       at scala.tools.nsc.MainGenericRunner$.main(MainGenericRunner.scala:105)
       at scala.tools.nsc.MainGenericRunner.main(MainGenericRunner.scala)
    

    That's a pretty tall stack trace. Here's what it looks like when you use trap:

    scala> trap { x shouldEqual 13 }
    res1: Throwable = org.scalatest.exceptions.TestFailedException: 12 did not equal 13
    

    Much less clutter. Bear in mind, however, that if no exception is thrown by the passed block of code, the trap method will create a new NormalResult (a subclass of Throwable made for this purpose only) and return that. If the result was the Unit value, it will simply say that no exception was thrown:

    scala> trap { x shouldEqual 12 }
    res2: Throwable = No exception was thrown.
    

    If the passed block of code results in a value other than Unit, the NormalResult's toString will print the value:

    scala> trap { "Dude!" }
    res3: Throwable = No exception was thrown. Instead, result was: "Dude!"
    

    Although you can access the result value from the NormalResult, its type is Any and therefore not very convenient to use. It is not intended that trap be used in test code. The sole intended use case for trap is decluttering Scala interpreter sessions by eliminating stack traces when executing assertion and matcher expressions.

    Definition Classes
    Assertions
  91. def typeCheckedConstraint[A, B](implicit equivalenceOfA: Equivalence[A], ev: <:<[B, A]): Constraint[A, B]

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that B must be a subtype of A, given an implicit Equivalence[A].

    Provides a Constraint[A, B] for any two types A and B, enforcing the type constraint that B must be a subtype of A, given an implicit Equivalence[A].

    The returned Constraint's areEqual method uses the implicitly passed Equivalence[A]'s areEquivalent method to determine equality.

    This method is overridden and made implicit by subtraits TypeCheckedTripleEquals) and TypeCheckedLegacyTripleEquals, and overriden as non-implicit by the other subtraits in this package.

    ev

    evidence that B is a subype of A

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEquivalent method of the passed Equivalence[A].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  92. implicit def unconstrainedEquality[A, B](implicit equalityOfA: Equality[A]): Constraint[A, B]

    Provides a Constraint[A, B] class for any two types A and B, with no type constraint enforced, given an implicit Equality[A].

    Provides a Constraint[A, B] class for any two types A and B, with no type constraint enforced, given an implicit Equality[A].

    The returned Constraint's areEqual method uses the implicitly passed Equality[A]'s areEqual method to determine equality.

    This method is overridden and made implicit by subtraits TripleEquals and LegacyTripleEquals, and overriden as non-implicit by the other subtraits in this package.

    equalityOfA

    an Equality[A] type class to which the Constraint.areEqual method will delegate to determine equality.

    returns

    a Constraint[A, B] whose areEqual method delegates to the areEqual method of the passed Equality[A].

    Definition Classes
    TripleEqualsTripleEqualsSupport
  93. final def wait(): Unit

    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  94. final def wait(arg0: Long, arg1: Int): Unit

    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  95. final def wait(arg0: Long): Unit

    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  96. def withClue[T](clue: Any)(fun: ⇒ T): T

    Executes the block of code passed as the second parameter, and, if it completes abruptly with a ModifiableMessage exception, prepends the "clue" string passed as the first parameter to the beginning of the detail message of that thrown exception, then rethrows it.

    Executes the block of code passed as the second parameter, and, if it completes abruptly with a ModifiableMessage exception, prepends the "clue" string passed as the first parameter to the beginning of the detail message of that thrown exception, then rethrows it. If clue does not end in a white space character, one space will be added between it and the existing detail message (unless the detail message is not defined).

    This method allows you to add more information about what went wrong that will be reported when a test fails. Here's an example:

    withClue("(Employee's name was: " + employee.name + ")") {
      intercept[IllegalArgumentException] {
        employee.getTask(-1)
      }
    }
    

    If an invocation of intercept completed abruptly with an exception, the resulting message would be something like:

    (Employee's name was Bob Jones) Expected IllegalArgumentException to be thrown, but no exception was thrown
    

    Definition Classes
    Assertions
    Exceptions thrown
    NullPointerException

    if the passed clue is null

  97. def withFixture(test: NoArgTest): Outcome

    Run the passed test function in the context of a fixture established by this method.

    Run the passed test function in the context of a fixture established by this method.

    This method should set up the fixture needed by the tests of the current suite, invoke the test function, and if needed, perform any clean up needed after the test completes. Because the NoArgTest function passed to this method takes no parameters, preparing the fixture will require side effects, such as reassigning instance vars in this Suite or initializing a globally accessible external database. If you want to avoid reassigning instance vars you can use fixture.Suite.

    This trait's implementation of runTest invokes this method for each test, passing in a NoArgTest whose apply method will execute the code of the test.

    This trait's implementation of this method simply invokes the passed NoArgTest function.

    test

    the no-arg test function to run with a fixture

    Attributes
    protected
    Definition Classes
    SuiteAbstractSuite

Deprecated Value Members

  1. def assert(o: Option[String]): Unit

    Assert that an Option[String] is None.

    Assert that an Option[String] is None. If the condition is None, this method returns normally. Else, it throws TestFailedException with the String value of the Some included in the TestFailedException's detail message.

    This form of assert is usually called in conjunction with an implicit conversion to Equalizer, using a === comparison, as in:

    assert(a === b)
    

    For more information on how this mechanism works, see the documentation for Equalizer.

    o

    the Option[String] to assert

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This method has been deprecated in favor of macro assertion and will be removed in a future version of ScalaTest. If you need this, please copy the source code into your own trait instead.

    Exceptions thrown
    TestFailedException

    if the Option[String] is Some.

  2. def assert(o: Option[String], clue: Any): Unit

    Assert that an Option[String] is None.

    Assert that an Option[String] is None. If the condition is None, this method returns normally. Else, it throws TestFailedException with the String value of the Some, as well as the String obtained by invoking toString on the specified clue, included in the TestFailedException's detail message.

    This form of assert is usually called in conjunction with an implicit conversion to Equalizer, using a === comparison, as in:

    assert(a === b, "extra info reported if assertion fails")
    

    For more information on how this mechanism works, see the documentation for Equalizer.

    o

    the Option[String] to assert

    clue

    An object whose toString method returns a message to include in a failure report.

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This method has been deprecated in favor of macro assertion and will be removed in a future version of ScalaTest. If you need this, please copy the source code into your own trait instead.

    Exceptions thrown
    NullPointerException

    if message is null.

    TestFailedException

    if the Option[String] is Some.

  3. def assume(o: Option[String]): Unit

    Assume that an Option[String] is None.

    Assume that an Option[String] is None. If the condition is None, this method returns normally. Else, it throws TestCanceledException with the String value of the Some included in the TestCanceledException's detail message.

    This form of assume is usually called in conjunction with an implicit conversion to Equalizer, using a === comparison, as in:

    assume(a === b)
    

    For more information on how this mechanism works, see the documentation for Equalizer.

    o

    the Option[String] to assert

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This method has been deprecated in favor of macro assumption and will be removed in a future version of ScalaTest. If you need this, please copy the source code into your own trait instead.

    Exceptions thrown
    TestCanceledException

    if the Option[String] is Some.

  4. def assume(o: Option[String], clue: Any): Unit

    Assume that an Option[String] is None.

    Assume that an Option[String] is None. If the condition is None, this method returns normally. Else, it throws TestCanceledException with the String value of the Some, as well as the String obtained by invoking toString on the specified clue, included in the TestCanceledException's detail message.

    This form of assume is usually called in conjunction with an implicit conversion to Equalizer, using a === comparison, as in:

    assume(a === b, "extra info reported if assertion fails")
    

    For more information on how this mechanism works, see the documentation for Equalizer.

    o

    the Option[String] to assert

    clue

    An object whose toString method returns a message to include in a failure report.

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This method has been deprecated in favor of macro assumption and will be removed in a future version of ScalaTest. If you need this, please copy the source code into your own trait instead.

    Exceptions thrown
    NullPointerException

    if message is null.

    TestCanceledException

    if the Option[String] is Some.

  5. def expect(expected: Any)(actual: Any): Unit

    This expect method has been deprecated; Please use assertResult instead.

    This expect method has been deprecated; Please use assertResult instead.

    To get rid of the deprecation warning, simply replace expect with assertResult. The name expect will be used for a different purposes in a future version of ScalaTest.

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This expect method has been deprecated. Please replace all invocations of expect with an identical invocation of assertResult instead.

  6. def expect(expected: Any, clue: Any)(actual: Any): Unit

    This expect method has been deprecated; Please use assertResult instead.

    This expect method has been deprecated; Please use assertResult instead.

    To get rid of the deprecation warning, simply replace expect with assertResult. The name expect will be used for a different purposes in a future version of ScalaTest.

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This expect method has been deprecated. Please replace all invocations of expect with an identical invocation of assertResult instead.

  7. def expectResult(expected: Any)(actual: Any): Unit

    This expectResult method has been deprecated; Please use assertResult instead.

    This expectResult method has been deprecated; Please use assertResult instead.

    To get rid of the deprecation warning, simply replace expectResult with assertResult. The name expectResult will be used for a different purposes in a future version of ScalaTest.

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This expectResult method has been deprecated. Please replace all invocations of expectResult with an identical invocation of assertResult instead.

  8. def expectResult(expected: Any, clue: Any)(actual: Any): Unit

    This expectResult method has been deprecated; Please use assertResult instead.

    This expectResult method has been deprecated; Please use assertResult instead.

    To get rid of the deprecation warning, simply replace expectResult with assertResult. The name expectResult will be used for a different purposes in a future version of ScalaTest.

    Definition Classes
    Assertions
    Annotations
    @deprecated
    Deprecated

    This expectResult method has been deprecated. Please replace all invocations of expectResult with an identical invocation of assertResult instead.

Inherited from FlatSpecLike

Inherited from Documenting

Inherited from Alerting

Inherited from Notifying

Inherited from Informing

Inherited from CanVerb

Inherited from MustVerb

Inherited from ShouldVerb

Inherited from TestRegistration

Inherited from Suite

Inherited from Serializable

Inherited from AbstractSuite

Inherited from Assertions

Inherited from TripleEquals

Inherited from TripleEqualsSupport

Inherited from AnyRef

Inherited from Any

Ungrouped