This post originated from an RSS feed registered with Web Buzz by Martin Vo. Original Post: How to Hard Reset Pantech Vega Racer Feed Title: Free Repair Guide Feed URL: http://www.freerepairguide.com/rss.html Feed Description: Free online repair guide, tips, how to, images on how to diagnose, repair / replace parts of about anything to save money and time. Latest Web Buzz Posts Latest Web Buzz Posts by Martin Vo Latest Posts From Free Repair Guide

Learn how you could perform a hard reset the Pantech Vega Racer.

If your new device is stuck or frozen you could reset it back to the default factory setting.

Note: before you carry out the below steps, if there are any data on the device that you want to keep then make sure you have back them up first. Once the device is reset, all the data on it will be erased. All data on the SD card should be preserved.

Reset through software menu

1. First go back to the Home screen.

2. Then press on the  Menu key.

3. Next choose Settings.

4. Now choose Privacy option.

5. Next select Factory Data Reset.

6. Then tap on Reset Phone. If you want to erase the SD card too then ensure the checkbox Erase SD card is ticked.

7. Put in the password when prompt.

8. Now tap on Erase everything.

Your phone should start to reboot short and bring itself back to factory setting.

If your phone is stuck and you can access the software menu then try the below.

Well you could try the hardware key combo when your Pantech Vega Racer device is stucked and you can't access the settings menu.

Reset using hardware key

1. Turn off the phone by pulling out the battery and put it back in.

2. Press and hold the Down Volume button.

3. Then press and hold on the Power button until you see the device switch on.

4. An on-screen instruction shall appears, and offer you the options to Fastbook, Recovery, Clear Storage, and Simlock. Use the Down Volume key and select Clear Storage.

5. Next press the let go of the Power button.

6. Confirm your choice by select Yes or No. Using the Volume key to make your selection.

Wait for your Pantech Vega Racer to reboot, then once it start up all your old setting should now go back to the factory default. Restore any of the data that you wish to use such as contacts or photos.