Waiter

Class that facilitates performing assertions outside the main test thread, such as assertions in callback methods that are invoked asynchronously.

To use Waiter, create an instance of it in the main test thread:

val w = new Waiter // Do this in the main test thread

At some point later, call await on the waiter:

w.await() // Call await() from the main test thread

The await call will block until it either receives a report of a failed assertion from a different thread, at which point it will complete abruptly with the same exception, or until it is dismissed by a different thread (or threads), at which point it will return normally. You can optionally specify a timeout and/or a number of dismissals to wait for. Here's an example:

import org.scalatest.time.SpanSugar._

w.await(timeout(300 millis), dismissals(2))

The default value for timeout, provided via an implicit PatienceConfig parameter, is 150 milliseconds. The default value for dismissals is 1. The await method will block until either it is dismissed a sufficient number of times by other threads or an assertion fails in another thread. Thus if you just want to perform assertions in just one other thread, only that thread will be performing a dismissal, so you can use the default value of 1 for dismissals.

Waiter contains four overloaded forms of await, two of which take an implicit PatienceConfig parameter. To change the default timeout configuration, override or hide (if you imported the members of AsyncAssertions companion object instead of mixing in the trait) patienceConfig with a new one that returns your desired configuration.

To dismiss a waiter, you just invoke dismiss on it:

w.dismiss() // Call this from one or more other threads

You may want to put dismiss invocations in a finally clause to ensure they happen even if an exception is thrown. Otherwise if a dismissal is missed because of a thrown exception, an await call will wait until it times out.

Finally, to perform an assertion in a different thread, you just apply the Waiter to the assertion code. Here are some examples:

w { assert(1 + 1 === 3) }    // Can use assertions
w { 1 + 1 should equal (3) } // Or matchers
w { "hi".charAt(-1) }        // Any exceptions will be forwarded to await

Here's a complete example:

import org.scalatest._
import concurrent.AsyncAssertions
import scala.actors.Actor

class ExampleSuite extends FunSuite with Matchers with AsyncAssertions {

  case class Message(text: String)

  class Publisher extends Actor {

    @volatile private var handle: Message => Unit = { (msg) => }

    def registerHandler(f: Message => Unit) {
      handle = f
    }

    def act() {
      var done = false
      while (!done) {
        react {
          case msg: Message => handle(msg)
          case "Exit" => done = true
        }
      }
    }
  }

  test("example one") {

    val publisher = new Publisher
    val message = new Message("hi")
    val w = new Waiter

    publisher.start()

    publisher.registerHandler { msg =>
      w { msg should equal (message) }
      w.dismiss()
    }

    publisher ! message
    w.await()
    publisher ! "Exit"
  }
}

Source: AsyncAssertions.scala

Linear Supertypes

AnyRef, Any

Instance Constructors

new Waiter()

Value Members

final def !=(arg0: Any): Boolean

Definition Classes
AnyRef → Any
final def ##(): Int

Definition Classes
AnyRef → Any
final def ==(arg0: Any): Boolean

Definition Classes
AnyRef → Any
def apply(fun: ⇒ Unit): Unit

Executes the passed by-name, and if it throws an exception, forwards it to the thread that calls await, unless a by-name passed during a previous invocation of this method threw an exception.
Executes the passed by-name, and if it throws an exception, forwards it to the thread that calls await, unless a by-name passed during a previous invocation of this method threw an exception.
This method returns normally whether or not the passed function completes abruptly. If called multiple times, only the first invocation that yields an exception will "win" and have its exception forwarded to the thread that calls await. Any subsequent exceptions will be "swallowed." This method may be invoked by multiple threads concurrently, in which case it is a race to see who wins and has their exception forwarded to await. The await call will eventually complete abruptly with the winning exception, or return normally if that instance of Waiter is dismissed. Any exception thrown by a by-name passed to apply after the Waiter has been dismissed will also be "swallowed."
fun
the by-name function to execute
final def asInstanceOf[T0]: T0

Definition Classes
Any
def await(timeout: Timeout, dismissals: Dismissals): Unit

Wait for an exception to be produced by the by-name passed to apply, or the specified number of dismissals, timing out after the specified timeout and sleeping an interval between checks configured by an implicit PatienceConfig.
Wait for an exception to be produced by the by-name passed to apply, or the specified number of dismissals, timing out after the specified timeout and sleeping an interval between checks configured by an implicit PatienceConfig.
This method may only be invoked by the thread that created the Waiter. Each time this method completes, its internal dismissal count is reset to zero, so it can be invoked multiple times. However, once await has completed abruptly with an exception produced during a call to apply, it will continue to complete abruptly with that exception.
The timeout parameter allows you to specify a timeout after which a TestFailedException will be thrown with a detail message indicating the await call timed out. If no calls to apply have produced an exception and an insufficient number of dismissals has been received by the time the timeout has expired, await will complete abruptly with TestFailedException.
As used here, a "check" is checking to see whether an exception has been thrown by a by-name passed to apply or the specified number of dismissals has occurred. The "interval" is the amount of time the thread that calls await will sleep between "checks."
def await(dismissals: Dismissals)(implicit config: AsyncAssertions.PatienceConfig): Unit

Wait for an exception to be produced by the by-name passed to apply, or the specified number of dismissals, sleeping an interval between checks and timing out after a timeout, both configured by an implicit PatienceConfig.
Wait for an exception to be produced by the by-name passed to apply, or the specified number of dismissals, sleeping an interval between checks and timing out after a timeout, both configured by an implicit PatienceConfig.
This method may only be invoked by the thread that created the Waiter. Each time this method completes, its internal dismissal count is reset to zero, so it can be invoked multiple times. However, once await has completed abruptly with an exception produced during a call to apply, it will continue to complete abruptly with that exception.
The timeout parameter allows you to specify a timeout after which a TestFailedException will be thrown with a detail message indicating the await call timed out. If no calls to apply have produced an exception and an insufficient number of dismissals has been received by the time the timeout has expired, await will complete abruptly with TestFailedException.
As used here, a "check" is checking to see whether an exception has been thrown by a by-name passed to apply or the specified number of dismissals has occurred. The "interval" is the amount of time the thread that calls await will sleep between "checks."
config
the PatienceConfig object containing the timeout parameter
def await(timeout: Timeout): Unit

Wait for an exception to be produced by the by-name passed to apply, or one dismissal, timing out after the specified timeout and sleeping an interval between checks configured by an implicit PatienceConfig.
Wait for an exception to be produced by the by-name passed to apply, or one dismissal, timing out after the specified timeout and sleeping an interval between checks configured by an implicit PatienceConfig.
This method may only be invoked by the thread that created the Waiter. Each time this method completes, its internal dismissal count is reset to zero, so it can be invoked multiple times. However, once await has completed abruptly with an exception produced during a call to apply, it will continue to complete abruptly with that exception.
The timeout parameter allows you to specify a timeout after which a TestFailedException will be thrown with a detail message indicating the await call timed out. If no calls to apply have produced an exception and an insufficient number of dismissals has been received by the time the timeout has expired, await will complete abruptly with TestFailedException.
As used here, a "check" is checking to see whether an exception has been thrown by a by-name passed to apply or a dismissal has occurred. The "interval" is the amount of time the thread that calls await will sleep between "checks."
def await()(implicit config: AsyncAssertions.PatienceConfig): Unit

Wait for an exception to be produced by the by-name passed to apply, or one dismissal, sleeping an interval between checks and timing out after a timeout, both configured by an implicit PatienceConfig.
Wait for an exception to be produced by the by-name passed to apply, or one dismissal, sleeping an interval between checks and timing out after a timeout, both configured by an implicit PatienceConfig.
This method may only be invoked by the thread that created the Waiter. Each time this method completes, its internal dismissal count is reset to zero, so it can be invoked multiple times. However, once await has completed abruptly with an exception produced during a call to apply, it will continue to complete abruptly with that exception.
The timeout parameter allows you to specify a timeout after which a TestFailedException will be thrown with a detail message indicating the await call timed out. If no calls to apply have produced an exception and an insufficient number of dismissals has been received by the time the timeout has expired, await will complete abruptly with TestFailedException.
As used here, a "check" is checking to see whether an exception has been thrown by a by-name passed to apply or a dismissal has occurred. The "interval" is the amount of time the thread that calls await will sleep between "checks."
config
the PatienceConfig object containing the timeout parameter
def clone(): AnyRef

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws( ... )
def dismiss(): Unit

Increases the dismissal count by one.
Increases the dismissal count by one.
Once the dismissal count has reached the value passed to await (and no prior invocations of apply produced an exception), await will return normally.
final def eq(arg0: AnyRef): Boolean

Definition Classes
AnyRef
def equals(arg0: Any): Boolean

Definition Classes
AnyRef → Any
def finalize(): Unit

Attributes
protected[java.lang]
Definition Classes
AnyRef
Annotations
@throws( classOf[java.lang.Throwable] )
final def getClass(): Class[_]

Definition Classes
AnyRef → Any
def hashCode(): Int

Definition Classes
AnyRef → Any
final def isInstanceOf[T0]: Boolean

Definition Classes
Any
final def ne(arg0: AnyRef): Boolean

Definition Classes
AnyRef
final def notify(): Unit

Definition Classes
AnyRef
final def notifyAll(): Unit

Definition Classes
AnyRef
final def synchronized[T0](arg0: ⇒ T0): T0

Definition Classes
AnyRef
def toString(): String

Definition Classes
AnyRef → Any
final def wait(): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )
final def wait(arg0: Long, arg1: Int): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )
final def wait(arg0: Long): Unit

Definition Classes
AnyRef
Annotations
@throws( ... )

Related Doc: package AsyncAssertions

class Waiter extends AnyRef

Instance Constructors

new Waiter()

Value Members

final def !=(arg0: Any): Boolean

final def ##(): Int

final def ==(arg0: Any): Boolean

def apply(fun: ⇒ Unit): Unit

final def asInstanceOf[T0]: T0

def await(timeout: Timeout, dismissals: Dismissals): Unit

def await(dismissals: Dismissals)(implicit config: AsyncAssertions.PatienceConfig): Unit

def await(timeout: Timeout): Unit

def await()(implicit config: AsyncAssertions.PatienceConfig): Unit

def clone(): AnyRef

def dismiss(): Unit

final def eq(arg0: AnyRef): Boolean

def equals(arg0: Any): Boolean

def finalize(): Unit

final def getClass(): Class[_]

def hashCode(): Int

final def isInstanceOf[T0]: Boolean

final def ne(arg0: AnyRef): Boolean

final def notify(): Unit

final def notifyAll(): Unit

final def synchronized[T0](arg0: ⇒ T0): T0

def toString(): String

final def wait(): Unit

final def wait(arg0: Long, arg1: Int): Unit

final def wait(arg0: Long): Unit

Inherited from AnyRef

Inherited from Any

Ungrouped